AGCO Allis 9755

Specifications & Review AGCO Allis 9755 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

AGCO Allis 9755

AGCO Allis 9755The AGCO Allis 9755 is a 4WD row-crop tractor from the 9700 series. This tractor was manufactured by the AGCO Allis from 1998 to 2001. The AGCO Allis 9755 is equipped with an 8.7 L six-cylinder diesel engine and full power shift transmission with hydraulic wet disc clutch and 18 forward and 6 reverse gears.

The AGCO Allis 9755 row-crop tractor used the Navistar engine. It is an 8.7 L, 8,702 cm2, (531.0 cu·in) six-cylinder natural aspirated diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 179.5 PS (132 kW; 177.0 HP) of output power.

The AGCO Allis 9755 is equipped with hydrostatic power steering, hydraulic wet disc brakes, cab and 439.0 liters (116 US gal.; 96.6 Imp. gal) fuel tank.

AGCO Allis 9755 Specifications

General Specifications
Model AGCO Allis 9755
Wheel base 2,870 mm (113 in)
Weight 8,210 kg (18,100 lbs)
Fuel tank capacity 439.0 liters (116 US gal.; 96.6 Imp. gal)
Battery 12V
Cabin type Cab
Engine model Navistar
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.7 L, 8,702 cm2, (531.0 cu·in)
Bore and stroke 117.0 mm X 136.0 mm (4.61 in X 5.35 in)
Compression ratio 16.5:1
Horsepower 179.5 PS (132 kW; 177.0 HP)
Starter Electric

Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Hydraulic wet disc
Transmission model
Transmission type Full power shift with hydraulic wet disc clutch
Gears 18 forward and 6 reverse
Speed Forward: 38.5 kmh (23.9 mph) Reverse: 10.8 (6.7 mph)
Transmission model
Transmission type Creeper
Gears 36 forward and 12 reverse
Front tires Ag: 14.9R-28
Rear tires Ag: 18.4R38

Three-Point Hitch
Caterogy III/IIIN
Control type
Lift capacity (at 610 mm / 24 in) 5,440 kg (11,995 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 1,000 rpm
Hydraulic system
Hydraulic type Closed center pressure flow compensated (PFC)
Pressure 2900 psi (199.9 bar)
Valves 4
Pump flow 29.0 gpm (110 lpm)
39.0 gpm (148 lpm) – optional

Maybe that’s all the information about the AGCO Allis 9755 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment