AGCO Allis 9785

Specifications & Review AGCO Allis 9785 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

AGCO Allis 9785

AGCO Allis 9785The AGCO Allis 9785 is a 4WD row-crop tractor manufactured by AGCO Allis from 1998 to 2001. The AGCO Allis 9785 is equipped with an 8.7 L (531.0 cu·in) six-cylinder diesel engine and a full powershift transmission with hydraulic wet disc clutch and 18 forward and 6 reverse gears (36 forward and 12 reverse gears with creeper).

The AGCO Allis 9785 row-crop tractor used the Navistar diesel engine. It is a 8.7 L, 8,702 cm2, (531.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. This engine produced 228.2 PS (167.8 kW; 225.0 HP) at 2,200 rpm of PTO output power.

The AGCO Allis 9785 is equipped with hydrostatic power steering, hydraulic wet disc brakes, Cab, and 454.2 liters (120 US gal.; 99.9 Imp. gal) fuel tank.


AGCO Allis 9785 Specifications

General Specifications
Model AGCO Allis 9785
Length
Width
Height
Wheel base 2,870 mm (113 in)
Weight 8,525 kg (18,794 lbs)
Fuel tank capacity 454.2 liters (120 US gal.; 99.9 Imp. gal)
Battery 12V
Cabin type Cab
Engine
Engine model Navistar
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.7 L, 8,702 cm2, (531.0 cu·in)
Bore and stroke 117.0 mm X 136.0 mm (4.61 in X 5.35 in)
Horsepower 228.2 PS (167.8 kW; 225.0 HP) at 2,200 rpm
Starter Electric

Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Hydraulic wet disc
Transmission model
Transmission type Full power shift with hydraulic wet disc clutch
Gears 18 forward and 6 reverse
Tires
Front tires Ag: 16.9R-28
Rear tires Ag: 18.4R-42

Three-Point Hitch
Caterogy III/IIIN
Control type
Lift capacity (at ends) 6,350 kg (14,000 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type Closed center pressure flow compensated (PFC)
Pressure 2900 psi (199.9 bar)
Valves 4
Pump flow 29.0 gpm (109.8 lpm)
39.0 gpm (147.6 lpm)

Maybe that’s all the information about the AGCO Allis 9785 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment