Specifications & Review AGCO DT225B Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..
The AGCO DT225B is a 4WD row-crop tractor from the DT-B series. This tractor was manufactured by AGCO in Beauvais, France from 2009 to 2010. The AGCO DT225B is equipped with an 8.4 L (512.0 cu·in) six-cylinder diesel engine and a continuously variable transmission with infinite forward and reverse gears.
The AGCO DT225B row-crop tractor used the AGCO SISU POWER 84CTA engine. It is a 8.4 L, 8,390 cm2, (512.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 111.0 mm (4.37 in) of the cylinder bore and 145.0 mm (5.71 in) of the piston stroke. The compression ratio rating is 16.7:1. This engine produced 268.7 PS (197.6 kW; 265.0 HP) at 2,200 rpm of output power, 299.0 PS (220.0 KW; 295.0 HP) of maximum horsepower and 1295.0 N·m (132.1 kg·m, 954.4 ft·lb) at 1,500 rpm of torque.
The AGCO DT225B is equipped with power steering, hydraulic wet disc brakes, Cab, and 590.0 liters (155.9 US gal.; 129.8 Imp. gal) fuel tank for variants with DEF (diesel exhaust fluid) or 690.0 liters (182.3 US gal, 151.8 Imp. gal) without DEF. This tractor could be equipped with the AGCO FL85 loader.
AGCO DT225B Specifications
General Specifications
Model
AGCO DT225B
Length
5,470 mm (215.4 in)
Width
–
Height
3,580 mm (140.9 in)
Wheel base
3,100 mm (122 in)
Weight
17,640 kg (38,889 lbs)
Fuel tank capacity
With DEF: 590.0 liters (155.9 US gal.; 129.8 Imp. gal) Without DEF: 690.0 liters (182.3 US gal.; 151.8 Imp. gal) Diesel exhaust fluid (DEF): 30.0 liters (7.9 US gal.; 6.6 Imp. gal)
Battery
12V
Cabin type
Cab
Engine
Engine model
AGCO SISU POWER 84CTA
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
6
Fuel type
Diesel
Displacement
8.4 L, 8,390 cm2, (512.0 cu·in)
Bore and stroke
111.0 mm X 145.0 mm (4.37 in X 5.71 in)
Compression ratio
16.7:1
Horsepower
268.7 PS (197.6 kW; 265.0 HP) at 2,200 rpm
Torque
1295.0 N·m (132.1 kg·m, 954.4 ft·lb) at 1,500 rpm
Starter
Electric
Transmission and chassis
Chassis
4×4 MFWD 4WD
Steering type
Power
Brakes
Hydraulic wet disc
Final drive
Inboard planetary
Differential lock
Full locking electro-hydraulic front and rear
Transmission model
PowerMaxx CVT
Transmission type
Continuously variable transmission
Gears
Infinite forward and reverse
Speed
Forward: 48.3 kmh (30 mph) Reverse: 38.6 (24 mph)
Tires
Front tires
Ag: 420/90R30
Rear tires
Ag: 480/80R46
Rear hitch
Caterogy
III or IV
Control type
–
Lift capacity (at ends)
12,000 kg (26,460 lbs)
Front hitch
Caterogy
III
Lift capacity (at ends)
5,000 kg (11,020 lbs)
Drawbar
Category III
Category III Heavy Duty
Category IV
PTO (Power take-off shaft)
Front PTO type
Optional
Front PTO speed
1,000 rpm
Rear PTO type
Independent with electro-hydraulic clutch
Rear PTO speed
1,000E/1,000 rpm
Hydraulic system
Hydraulic type
Closed center load sensing
Pressure
2900 psi (199.9 bar)
Valves
4 to 6
SCV flow
26.4 gpm (99.9 lpm)
Total flow
46.2 gpm (174.9 lpm)
Maybe that’s all the information about the AGCO DT225B tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The AGCO DT225B is a 4WD row-crop tractor from the DT-B series. This tractor was manufactured by AGCO in Beauvais, France from 2009 to 2010. The AGCO DT225B is equipped with an 8.4 L (512.0 cu·in) six-cylinder diesel engine and a continuously variable transmission with infinite forward and reverse gears.
