Specifications & Review AGCO GT75 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

AGCO GT75The AGCO GT75 is a 2WD or 4WD utility tractor from the GT series. This tractor was manufactured by AGCO in Italy from 2004 to 2007. The AGCO GT75 is equipped with a 4.0 L (244.0 cu·in) four-cylinder diesel engine and a synchro-shuttle transmission with 16 forward and 8 reverse gears.

The AGCO GT75 utility tractor used the SAME Deutz-Fahr engine. It is a 4.0 L, 3,998 cm2, (244.0 cu·in) four-cylinder turbocharged diesel engine with 105.0 mm (4.13 in) of the cylinder bore and 115.0 mm (4.53 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 84.2 PS (61.9 kW; 83.0 HP) at 2,200 rpm of output power.

The AGCO GT75 is equipped with power steering, wet disc brakes, a two-post folding ROPS or cab (optional), and 89.7 liters (23.7 US gal.; 19.7 Imp. gal) fuel tank.

AGCO GT75 Specifications

General Specifications
Model AGCO GT75
Length 3,850 mm (151.6 in)
Width 1,940 mm (76.4 in)
Height 2,690 mm (105.9 in)
Wheel base 2WD: 2,230 mm (87.8 in)
4WD: 2,180 mm (85.8 in)
Weight 2WD ROPS: 2,500 kg (5,510 lbs)
4WD ROPS: 2,720 kg (6,000 lbs)
2WD Cab: 2,740 kg (6,040 lbs)
4WD Cab: 2,960 kg (6,525 lbs)
Fuel tank capacity 89.7 liters (23.7 US gal.; 19.7 Imp. gal)
Battery 12V
Cabin type Two-post folding ROPS or Cab (optional)
Engine model SAME Deutz-Fahr
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.0 L, 3,998 cm2, (244.0 cu·in)
Bore and stroke 105.0 mm X 115.0 mm (4.13 in X 4.53 in)
Compression ratio 16.0:1
Horsepower 84.2 PS (61.9 kW; 83.0 HP) at 2,200 rpm
Torque 321.4 N·m (32.8 kg·m, 236.9 ft·lb) at 1,300 rpm
Starter Electric

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model
Transmission type Synchro-shuttle
Gears 16 forward and 8 reverse
Front tires
Rear tires

Three-Point Hitch
Category II
Control type
Lift capacity (at 610 mm/ 24 in) 1,600 kg (3,530 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with electro-hydraulic clutch
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Pump flow 14.0 gpm (53 lpm)
Total flow 22.7 gpm (85.9 lpm)

Maybe that’s all the information about the AGCO GT75 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment