AGCO White 8810

Specifications & Review AGCO White 8810 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

AGCO White 8810The AGCO White 8810 is a 4WD row-crop tractor from the FieldMaster 8010 series. This tractor was manufactured by AGCO White in Coldwater, Ohio, USA, or Beauvais, France from 1998 to 2001. The AGCO White 8810 is equipped with an 8.3 L (505.0 cu·in) six-cylinder diesel engine and a full powershift transmission with electro-hydraulic wet disc clutch and 18 forward and 6 reverse gears.

The AGCO White 8810 row-crop tractor used the Cummins C8.3A engine. It is a 8.3 L, 8,275 cm2, (505.0 cu·in) six-cylinder turbocharged aftercooled diesel engine with 114.0 mm (4.49 in) of the cylinder bore and 135.0 mm (5.31 in) of the piston stroke. The compression ratio rating is 17.3:1. This engine produced 228.2 PS (167.8 kW; 225.0 HP) at 2,200 rpm of PTO output power.

The AGCO White 8810 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, Cab, and 454.2 liters (120 US gal.; 99.9 Imp. gal) fuel tank.

AGCO White 8810 Specifications

General Specifications
Model AGCO White 8810
Length 5,150 mm (202.8 in)
Width 2,490 mm (98 in)
Height 3,070 mm (120.9 in)
Wheel base 3,070 mm (120.9 in)
Weight 8,955 kg (19,742 lbs)
Fuel tank capacity 454.2 liters (120 US gal.; 99.9 Imp. gal)
Battery 12V
Cabin type Cab
Engine model Cummins C8.3A
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.3 L, 8,275 cm2, (505.0 cu·in)
Bore and stroke 114.0 mm X 135.0 mm (4.49 in X 5.31 in)
Compression ratio 17.3:1
Horsepower 228.2 PS (167.8 kW; 225.0 HP) at 2,200 rpm
Starter Electric

Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Differential hydraulic wet disc
Transmission model Funk-Deere
Transmission type Full power shift with electro-hydraulic wet disc clutch
Gears 18 forward and 6 reverse
Speed Forward: 37.2 kmh (23.1 mph) Reverse: 10.4 (6.5 mph)
Front tires Ag: 16.9R28
Rear tires Ag: 18.4R42

Three-Point Hitch
Caterogy III/IIIN
Control type
Lift capacity (at ends) 6,350 kg (14,000 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type Closed center pressure flow compensated (PFC)
Pressure 2900 psi (199.9 bar)
Valves 4
Pump flow 29.0 gpm (109.8 lpm)
39.0 gpm (147.6 lpm) (optional)

Maybe that’s all the information about the AGCO White 8810 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment