Specifications & Review Allis Chalmers 180 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..
The Allis Chalmers 180 is a 2WD row-crop tractor manufactured by the Allis Chalmers in West Allis, Wisconsin, USA from 1967 to 1973. The Allis Chalmers 180 is equipped with 4.9 L diesel engine or 4.3 L gasoline engine and partial powershift transmission with 8 forward and 2 reverse gears.
The Allis Chalmers 180 row-crop tractor was available with diesel or gasoline engines. The Allis Chalmers 2800 is a 4.9 L, 4,933 cm2, (301 cu·in) six-cylinder diesel engine with 98.0 mm (3.86 in) of cylinder bore and 108.0 mm (4.25 in) of piston stroke. The compression ratio rating is 16.0:1. Another engine is the Allis Chalmers six-cylinder gasoline engine with 4.3 L, 4,343 cm2, (265 cu·in) of displacement. It has a 95.0 mm (3.74 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke, compression ratio rating is 8.2:1.
The Allis Chalmers 180 is equipped with hydraulic power steering, differential disc brakes, open operator station and 93 liters (24.6 US gal.; 20.5 Imp. gal) fuel tank.
|
Allis Chalmers 180 Specifications
General Specifications | |
Model | Allis Chalmers 180 |
Length | 4,010 mm (157.9 in) |
Width | 1,940 mm (76.4 in) |
Height | 2,110 mm (83.1 in) |
Wheel base | 2,510 mm (98.8 in) |
Weight | 4,660 kg (10,274 lbs) |
Fuel tank capacity | 93 liters (24.6 US gal.; 20.5 Imp. gal) |
Battery | One or two 12V 95A |
Cabin type | Open operator station |
Engine | |
Engine model | Allis Chalmers 2800 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 4.9 L, 4,933 cm2, (301 cu·in) |
Bore and stroke | 98.0 mm X 108.0 mm (3.86 in X 4.25 in) |
Compression ratio | 16.0:1 |
Horsepower | – |
Starter | Electric |
Oil capacity: | 9.5 L (10.04 US. qt, 8.36 Imp. qt.) |
Coolant capacity: | 16.0 L (16.91 US. qt, 14.08 Imp. qt.) |
Engine | |
Engine model | Allis Chalmers |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Gasoline |
Displacement | 4.3 L, 4,343 cm2, (265 cu·in) |
Bore and stroke | 95.0 mm X 102.0 mm (3.74 in X 4.02 in) |
Compression ratio | 8.2:1 |
Horsepower | – |
Starter | Electric |
Oil capacity: | 11.5 L (12.15 US. qt, 10.12 Imp. qt.) |
|
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Hydraulic power |
Brakes | Differential disc |
Transmission model | Allis-Chalmers Power Director |
Transmission type | Partial powershift |
Gears | 8 forward and 2 reverse |
Speed | Forward: 22.0 kmh (13.7 mph) Reverse: 6.3 (3.9 mph) |
Transmission oil capacity | 22.7 L (23.99 US. qt, 19.97 Imp. qt.) |
Tires | |
Front tires | Ag: 6.50-16; 7.50-16; 9.00-10 |
Rear tires | Ag: 14.9/13-28; 16.9/14-28; 18.4/15-28; 23.1/18-26 |
|
Three-Point Hitch | |
Caterogy | II |
Control type | – |
Lift capacity | – |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 34.0 L (35.93 US. qt, 29.92 Imp. qt.) |
Valves | 2 |
Pump flow | 10 gpm (37.9 lpm) |
Steering flow | 5.8 gpm (22 lpm) |
Maybe that’s all the information about the Allis Chalmers 180 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you