Specifications & Review Allis Chalmers 5015 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..
The Allis Chalmers 5015 is a 2WD or 4WD sub-compact utility tractor manufactured by Hinomoto for distributor Allis Chalmers in Osaka, Japan from 1982 to 1985. The Allis Chalmers 5015 is equipped with a 1.0 L (61.3 cu·in) three-cylinder diesel engine and a gear type transmission with 9 forward and 3 reverse gears.
The AC 5015 sub-compact utility tractor used the Toyosha CS-100 engine. It is a 1.0 L, 1,004 cm2, (61.3 cu·in) three-cylinder natural aspirated diesel engine with 73.0 mm (2.87 in) of the cylinder bore and 80.0 mm (3.15 in) of the piston stroke. The compression ratio rating is 22.5:1. This engine produced 18.2 PS (13.4 kW; 18.0 HP) at 2,500 rpm of output power.
Following attachments are available for the Allis Chalmers 5015 sub-compact utility tractor:
Mid-mount Allis Chalmers 1690769 48 in (1,210 mm) mower deck with 3-blades
Mid-mount Allis Chalmers 54 in (1,370 mm) mower deck with 3-blades
Mid-mount Allis Chalmers 1690373 60 in (1,520 mm) mower deck with 3-blades
Front-mount Allis Chalmers 60 in (1,520 mm) blade
Front-mount Allis Chalmers 52 in (1,320 mm) snowblower
Allis Chalmers 415 loader
Allis Chalmers 5015 Specifications
General Specifications
Model
Allis Chalmers 5015
Length
2,100 mm (82.7 in)
Width
1,030 mm (40.6 in)
Height
1,030 mm (40.6 in)
Wheel base
1,290 mm (50.8 in)
Weight
630 kg (1,389 lbs)
Fuel tank capacity
14.0 liters (3.7 US gal.; 3.1 Imp. gal)
Battery
12V
Cabin type
Open operator station with two-post ROPS
Engine
Engine model
Toyosha CS-100
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
3
Fuel type
Diesel
Displacement
1.0 L, 1,004 cm2, (61.3 cu·in)
Bore and stroke
73.0 mm X 80.0 mm (2.87 in X 3.15 in)
Compression ratio
22.5:1
Horsepower
18.2 PS (13.4 kW; 18 HP) at 2,500 rpm
Starter
Electric
Oil capacity:
2.2 L (2.3 US. qt, 1.9 Imp. qt.)
Coolant capacity:
3.0 L (3.2 US. qt, 2.6 Imp. qt.)
Transmission and chassis
Chassis
4×2 2WD or 4×4 MFWD 4WD
Steering type
–
Brakes
–
Transmission model
Transmission type
Gear type
Gears
9 forward and 3 reverse
Transmission oil capacity
17.0 L (4.5 US. gal, 3.7 Imp. gal.)
Tires
Front tires
Ag: 4-12 (2WD), 5-14 (4WD) Lawn/turf: 20.5×8-10
Rear tires
Ag: 8-18 Lawn/turf: 29×12-15
Three-Point Hitch
Caterogy
I
Control type
Position control
Lift capacity (at ends)
–
PTO (Power take-off shaft)
Rear PTO type
Continuous
Rear PTO speed
540 rpm
Hydraulic system
Hydraulic type
Open center
Hydraulic capacity
17.0 L (17.96 US. qt, 14.96 Imp. qt.)
Valves
0 or 1
Maybe that’s all the information about the Allis Chalmers 5015 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The Allis Chalmers 5015 is a 2WD or 4WD sub-compact utility tractor manufactured by Hinomoto for distributor Allis Chalmers in Osaka, Japan from 1982 to 1985. The Allis Chalmers 5015 is equipped with a 1.0 L (61.3 cu·in) three-cylinder diesel engine and a gear type transmission with 9 forward and 3 reverse gears.
