Allis Chalmers 5030

Specifications & Review Allis Chalmers 5030 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

The Allis Chalmers 5030 is a two-wheel compact utility tractor, manufactured by Japanese company Hinomoto on the factory in Osaka, Japan for Allis Chalmers from 1979 to 1985. This tractor is the same as the Simplicity 9528. The Allis Chalmers 5030 is equipped with two-cylinders liquid-cooled Toyosha S148 diesel engine with 1.5 L, 1,477 cc (90.1 cu-in) of displacement and sliding gear transmission with 12 forward and 3 reverse gears (four forward gears and reverse, with high, low, and creeper ranges).

The Allis Chalmers 5030 utility tractor used a two-cylinder naturally-aspirated liquid-cooled Toyosha S148 diesel engine with 97.0 mm (3.82 in) of the cylinder bore and 100.0 mm (3.94 in) of the piston stroke. Compression ratio rating is 23:1. It produced 28.0 HP (20.9 kW) of maximum horsepower or 26.0 HP (19.4 kW) on PTO-shaft. The engine used Donaldson dry air cleaner.


The tractor is equipped with sliding gear transmission with 12 forward (0.5-20.9 km/h, 0.3-13.0 mph) and 3 reverse (1.0-14.8 km/h, 0.6-9.2 mph) gears. The Allis Chalmers 5030 used mechanical steering, molded asbestos single plate dry clutch, differential mechanical drum, and shoe brakes, two-pinion spiral-helical differential with 3.9:1 of ratio and gear type hydraulic pump from Kayaba.

The Allis Chalmers 5030 tractor can use the following attachments:

  • Rear mount Allis Chalmers mower deck (cutting width: 1,520 mm (60 in.)
  • Tiller (1,270 mm, 50 in.)
  • Rear blade (1,828 mm, 72 in.)
  • Box scraper (1,667 mm, 66 in.)
  • Allis-Chalmers 430 front-end loader

The Allis Chalmers 5030 used two-post rollover protection structure (ROPS) to operators and ROPS canopy as an option.

Allis Chalmers 5030 specifications

General Specifications
Model Allis Chalmers 5030
Length 2,550 mm (100.4 in.)
Width 1,360 mm (53.5 in.)
Height Exhaust Stack: 2,080 mm (81.9 in.)
Hood: 1,140 mm (45.1 in.)
Steering Wheel: 1,360 mm (53.7 in.)
Wheelbase 1,560 mm (61.8 in.)
Ground clearance 360-390 mm (14.5-15.6 in.)
Weight Operated: 1,147 kg (2,530 lb.)
Ballasted: 1,758 kg (3,876 lb.)
Fuel tank capacity 27.0 L (7.0 Gal.)
Battery 12V – 70A

Engine
Engine model Toyosha S148
Fuel Diesel
Displacement 1.5 L, 1,477 L (90.1 cu.in.)
Bore x stroke 97.0 x 100.0 mm (3.82 x 3.92 in)
Power output 28.0 HP (20.9 kW)
Torque
Starter type Electric starter Hitachi S13-31
Oil type
Oil capacity 4.0-4.7 L (4.2-5.0 qt.)
Coolant capacity 5.0 L (5.3 qt.)
Tires size
Front tires Ag: 5.0×15
Turf / Lawn: 20×8.0-10
Rear tires Ag: 12.4×24
Turf: 13.6×16, 20×8.00-10

Transmission and chassis
Chassis 4×2 2WD
Steering Mechanical
Transmission type Sliding gear
Gears 12 forward and 3 reverse
Ground speed Forward: up to 20.9 km/h (13.0 mph)
Reverse: up to 14.8 km/h (9.2 mph)
Transmission oil capacity 25.5 L (6.7 Gal)
PTO (Power take-off shaft)
PTO Type: Rear, transmission PTO
PTO Speed: 540 rpm
Hydraulic lift
3-point linkage: Category I
Control system:
No. of remote valves: 1
Max lifting capacity (at link end):
Hydraulic system
Type Open center
Pump flow 20.6 l/m (5.44 gpm)
Oil capacity 25.5 L (6.7 Gal)

Maybe that’s all the information about the Allis Chalmers 5030 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment