Allis Chalmers 5040

Specifications & Review Allis Chalmers 5040 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

Allis Chalmers 5040The Allis Chalmers 5040 is a 2WD utility tractor manufactured by UTB/Universal for Allis Chalmers in Brasov, Romania from 1976 to 1980. The Allis Chalmers 5040 is equipped with a 2.3 L (142.8 cu·in) three-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with dry disc clutch and 6 forward and 2 reverse gears, a partially synchronized transmission with dry disc clutch and 8 forward and 2 reverse gears or a creeper with 12 forward and 3 reverse gears.

The Allis Chalmers 5040 utility tractor used the Uzina engine. It is a 2.3 L, 2,340 cm2, (142.8 cu·in) three-cylinder natural aspirated diesel engine with 95.0 mm (3.74 in) of the cylinder bore and 100.0 mm (3.94 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 40.5 PS (29.8 kW; 40.0 HP) of PTO output power.

The Allis Chalmers 5040 is equipped with power steering, mechanical band brakes, open operator station or ROPS (optional) and 53.9 liters (14.2 US gal.; 11.9 Imp. gal) fuel tank.


Allis Chalmers 5040 Specifications

General Specifications
Model Allis Chalmers 5040
Length 2,940 mm (115.7 in)
Width 1,540 mm (60.6 in)
Height 1,940 mm (76.4 in)
Wheel base 1,880 mm (74 in)
Weight 1,750 kg (3,858 lbs)
Fuel tank capacity 53.9 liters (14.2 US gal.; 11.9 Imp. gal)
Battery 12V
Cabin type Open operator station or ROPS (optional)
Engine
Engine model Uzina
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.3 L, 2,340 cm2, (142.8 cu·in)
Bore and stroke 95.0 mm X 100.0 mm (3.74 in X 3.94 in)
Compression ratio 17.0:1
Horsepower 40.5 PS (29.8 kW; 40.0 HP)
Starter Electric
Oil capacity: 7.9 L (8.3 US. qt, 7 Imp. qt.)
Coolant capacity: 13.2 L (13.9 US. qt, 11.6 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Brakes Mechanical band
Differential lock Mechanical rear
Transmission model
Transmission type Partially synchronized with dry disc clutch
Gears 6 forward and 2 reverse
Speed Forward: 24.5 kmh (15.2 mph) Reverse: 12.6 (7.8 mph)
Transmission oil capacity 18.0 L (4.8 US. gal, 4 Imp. gal.)
Transmission model
Transmission type Partially synchronized with dry disc clutch
Gears 8 forward and 2 reverse
Speed Forward: 24.3 kmh (15.1 mph) Reverse: 12.2 (7.6 mph)
Transmission oil capacity 18.0 L (4.8 US. gal, 4 Imp. gal.)
Transmission model
Transmission type Creeper
Gears 12 forward and 3 reverse
Tires
Front tires Ag: 6.00-16
Rear tires Ag: 13.6-28

Three-Point Hitch
Caterogy II/I
Control type Position control and top-link draft sensing
Lift capacity (at ends) 1,199 kg (2,644 lbs)
PTO (Power take-off shaft)
Rear PTO type Continuous or independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 18.0 L (19.02 US. qt, 15.84 Imp. qt.)
Valves 1

Maybe that’s all the information about the Allis Chalmers 5040 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment