Allis Chalmers 5045

Specifications & Review Allis Chalmers 5045 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

Allis Chalmers 5045The Allis Chalmers 5045 is a 2WD utility tractor manufactured by the Fiat for Allis Chalmers in Italy from 1981 to 1983. The Allis Chalmers 5045 is equipped with 2.6 L three-cylinder diesel engine and partially synchronized transmission (8 forward and 2 reverse gears) with dry disc clutch.

The Allis Chalmers 5045 utility tractor used 2.6 L, 2,589 cm2, (158 cu·in) three-cylinders diesel engine with 100.0 mm (3.94 in) of cylinder bore and 110.0 mm (4.33 in) of piston stroke. This engine produced 44.6 PS (32.8 kW; 44 HP) of maximum output power.

The Allis Chalmers 5045 is equipped with a hydraulic power steering, open operator station, ROPS (Rollover protection structure) was available as an option and 54.0 liters (14.3 US gal.; 11.9 Imp. gal) fuel tank.

Allis Chalmers 5045 Specifications

General Specifications
Model Allis Chalmers 5045
Model Allis Chalmers 5045
Length 2,979 mm (117.3 in)
Width 1,549 mm (61 in)
Wheel base 1,910 mm (75.2 in)
Weight 1,750 kg (3,858 lbs)
Fuel tank capacity 54.0 liters (14.3 US gal.; 11.9 Imp. gal)
Battery 12V
Cabin type Open operator station. ROPS optional.
Engine model Fiat
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.6 L, 2,589 cm2, (158 cu·in)
Bore and stroke 100.0 mm X 110.0 mm (3.94 in X 4.33 in)
Compression ratio 17.0:1
Horsepower 44.6 PS (32.8 kW; 44 HP) at rpm
Starter Electric
Oil capacity: 13.5 L (14.27 US. qt, 11.88 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type Hydraulic power
Transmission model
Transmission type Partially synchronized with dry disc clutch
Gears 8 forward and 2 reverse
Speed Forward: 24.2 kmh (15 mph) Reverse: 12.2 (7.6 mph)
Front tires Ag: 6.00-16
Rear tires Ag: 13.6-28

Three-Point Hitch
Caterogy II/I
Control type Position control and top-link draft sensing
Lift capacity
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 23.6 L (24.94 US. qt, 20.77 Imp. qt.)
Valves 14

Maybe that’s all the information about the Allis Chalmers 5045 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment