Specifications & Review Allis Chalmers 6060 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..
The Allis Chalmers 6060 is a 2WD/4WD row-crop tractor from the 6000 series. This tractor was manufactured by Allis Chalmers in West Allis, Wisconsin, USA from 1980 to 1984. The Allis Chalmers 6060 is equipped with a 3.3 L (200.0 cu·in) four-cylinder diesel engine and a partially synchronized transmission with 8 forward and 2 reverse gears.
The Allis Chalmers 6060 row-crop tractor used the Allis Chalmers 433T engine. It is a 3.3 L, 3,277 cm2, (200.0 cu·in) four-cylinder turbocharged diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 108.0 mm (4.25 in) of the piston stroke. The compression ratio rating is 14.1:1. This engine produced 71.0 PS (52.2 kW; 70.0 HP) at 2,300 rpm of output power.
The AC 6060 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, four-post ROPS or Cab (optional), and 121.0 liters (32 US gal.; 26.6 Imp. gal) fuel tank.
|
Allis Chalmers 6060 Specifications
General Specifications | |
Model | Allis Chalmers 6060 |
Length | 3,720 mm (146.5 in) |
Width | 1,730 mm (68.1 in) |
Height |
ROPS: 2,730 mm (107.5 in) Cab: 2,620 mm (103.2 in) |
Wheel base |
2WD: 2,360 mm (92.9 in) 4WD: 2,330 mm (91.9 in) |
Weight (ballasted) | 4,060 kg (8,951 lbs) |
Fuel tank capacity | 121.0 liters (32 US gal.; 26.6 Imp. gal) |
Battery | One 12V, Two 12V (optional) |
Cabin type | Four-post ROPS or Cab (optional) |
Engine | |
Engine model | Allis Chalmers 433T |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 3.3 L, 3,277 cm2, (200.0 cu·in) |
Bore and stroke | 98.0 mm X 108.0 mm (3.86 in X 4.25 in) |
Compression ratio | 14.1:1 |
Horsepower | 71.0 PS (52.2 kW; 70.0 HP) at 2,300 rpm |
Starter | Electric |
Oil capacity: | 9.5 L (10 US. qt, 8.4 Imp. qt.) |
Coolant capacity: | 16.1 L (17 US. qt, 14.2 Imp. qt.) |
|
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Differential hydraulic wet disc |
Transmission model | – |
Transmission type | Partially synchronized |
Gears | 8 forward and 2 reverse |
Speed | Forward: 24.0 kmh (14.9 mph) Reverse: 11.1 (6.9 mph) |
Transmission oil capacity | 11.4 L (3 US. gal, 2.5 Imp. gal.) |
Tires | |
Front tires | Ag: 7.50-16 (2WD), 11.2-24 (4WD) |
Rear tires | Ag: 16.9-28 (2WD), 18.4-28 (4WD) |
|
Three-Point Hitch | |
Caterogy | II |
Control type | – |
Lift capacity (at 610 mm / 24 in) | 1,585 kg (3,495 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Valves | 4 |
Pump flow | 11.4 gpm (43.2 lpm) |
Total flow | 19.0 gpm (71.9 lpm) |
Maybe that’s all the information about the Allis Chalmers 6060 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you