Allis Chalmers 6080

Specifications & Review Allis Chalmers 6080 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

Allis Chalmers 6080The Allis Chalmers 6080 is a 2WD or 4WD row-crop tractor from the 6000 series. This tractor was manufactured by Allis Chalmers in West Allis, Wisconsin, USA from 1980 to 1985. The Allis Chalmers 6080 is equipped with a 3.3 L (200.0 cu·in) four-cylinder diesel engine and a synchronized transmission with 12 forward and 3 reverse gears.

The Allis Chalmers 6080 row-crop tractor used the Allis Chalmers 433TI engine. It is a 3.3 L, 3,277 cm2, (200.0 cu·in) four-cylinder turbocharged and intercooled diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 108.0 mm (4.25 in) of the piston stroke. The compression ratio rating is 14.1:1 for the early versions and 15.5:1 for the later. This engine produced 94.2 PS (69.3 kW; 93.0 HP) at 2,300 rpm of output power.

The Allis Chalmers 6080 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, Four-post ROPS canopy or cab, and 121.0 liters (32 US gal.; 26.6 Imp. gal) fuel tank.


Allis Chalmers 6080 Specifications

General Specifications
Model Allis Chalmers 6080
Length 3,790 mm (149.2 in)
Width 1,850 mm (72.8 in)
Height ROPS: 2,730 mm (107.5 in)
Cab: 2,620 mm (103.2 in)
Wheel base 2WD: 2,430 mm (95.7 in)
4WD: 2,420 mm (95.3 in)
Weight (2WD ROPS) 2,950 kg (6,504 lbs)
Fuel tank capacity 121.0 liters (32 US gal.; 26.6 Imp. gal)
Battery 12V
Cabin type Four-post ROPS canopy or cab with air-conditoning (optional)
Engine
Engine model Allis Chalmers 433TI
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.3 L, 3,277 cm2, (200.0 cu·in)
Bore and stroke 98.0 mm X 108.0 mm (3.86 in X 4.25 in)
Compression ratio Early: 14.1:1,
Later: 15.5:1
Horsepower 94.2 PS (69.3 kW; 93.0 HP) at 2,300 rpm
Starter Electric
Oil capacity: 9.5 L (10 US. qt, 8.4 Imp. qt.)
Coolant capacity: 16.1 L (17 US. qt, 14.2 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Differential hydraulic wet disc
Transmission model
Transmission type Synchronized
Gears 12 forward and 3 reverse
Speed Forward: 29.0 kmh (18 mph) Reverse: 13.5 (8.4 mph)
Tires
Front tires Ag: 7.50-16 (2WD), 11.2-28 (4WD)
Rear tires Ag: 18.4-34 (2WD), 16.9-34 (4WD)

Three-Point Hitch
Caterogy II
Control type
Lift capacity (at 610 mm /24 in) 2,040 kg (4,500 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Open center
Valves 2
Pump flow 11.4 gpm (43.2 lpm)
Steering flow 19.0 gpm (71.9 lpm)

Maybe that’s all the information about the Allis Chalmers 6080 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment