Specifications & Review Allis Chalmers 7050 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..
The Allis Chalmers 7050 is a 2WD row-crop tractor from the 7000 series. This tractor was manufactured by Allis Chalmers in West Allis, Wisconsin, USA from 1973 to 1974. The Allis Chalmers 7050 is equipped with a 7.0 L (426.0 cu·in) six-cylinder diesel engine and a partial power shift transmission with 20 forward and 4 reverse gears.
The Allis Chalmers 7050 row-crop tractor used the Allis Chalmers engine. It is a 7.0 L, 6,980 cm2, (426.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 175.4 PS (129.0 kW; 173.0 HP) at 2,300 rpm of output power.
The Allis Chalmers 7050 is equipped with hydrostatic power steering, differential hydraulic wet discs brakes, open operator station or cab (optional), and 193.0 liters (51 US gal.; 42.5 Imp. gal) fuel tank.
Allis Chalmers 7050 Specifications
|Model||Allis Chalmers 7050|
|Length||4,140 mm (163 in)|
|Width||2,420 mm (95.3 in)|
|Height||2,940 mm (115.7 in)|
|Weight||6,590 kg (14,528 lbs)|
|Fuel tank capacity||193.0 liters (51 US gal.; 42.5 Imp. gal)|
|Cabin type||Open operator station or Cab (optional)|
|Engine model||Allis Chalmers|
|Engine type||Four-stroke, liquid-cooled, inline|
|Displacement||7.0 L, 6,980 cm2, (426.0 cu·in)|
|Bore and stroke||108.0 mm X 127.0 mm (4.25 in X 5 in)|
|Horsepower||175.4 PS (129.0 kW; 173.0 HP) at 2,300 rpm|
|Transmission and chassis|
|Steering type||Hydrostatic power|
|Brakes||Differential hydraulic wet discs|
|Transmission model||Power Director XX|
|Transmission type||Partial power shift|
|Gears||20 forward and 4 reverse|
|Front tires||Ag: 11.00-16|
|Rear tires||Ag: 20.8-38|
|Lift capacity (at ends)||–|
|PTO (Power take-off shaft)|
|Rear PTO type||Independent|
|Rear PTO speed||540/1,000 rpm|
|Hydraulic type||Open center|
Maybe that’s all the information about the Allis Chalmers 7050 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you