Specifications & Review Allis Chalmers 8010 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..
The Allis Chalmers 8010 is a 2WD or 4WD row-crop tractor from the 8000 series. This tractor was manufactured by Allis Chalmers in West Allis, Wisconsin, USA from 1982 to 1985. The Allis Chalmers 8010 is equipped with a 4.9 L (301.0 cu·in) six-cylinder diesel engine and one of three transmissions: a partial power shift transmission with 16 forward and 4 reverse gears, a partial power shift transmission with 20 forward and 4 reverse gears or a power shift transmission with 12 forward and 2 reverse gears.
The Allis Chalmers 8010 row-crop tractor used the Allis Chalmers 649T engine. It is a 4.9 L, 4,932 cm2, (301.0 cu·in) six-cylinder turbocharged diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 108.0 mm (4.25 in) of the piston stroke. The compression ratio rating is 15.5:1. This engine produced 120.6 PS (88.7 kW; 119.0 HP) at 2,300 rpm of output power.
The AC 8010 is equipped with hydrostatic power steering, differential hydraulic wet discs brakes, the Acousta cab, 227.1 liters (60 US gal.; 50 Imp. gal) fuel tank and 94.6 liters (25 US gal, 20.8 Imp. gal) optional fuel tank.
|
Allis Chalmers 8010 Specifications
General Specifications | |
Model | Allis Chalmers 8010 |
Length | 4,740 mm (186.6 in) |
Width | 2,350 mm (92.5 in) |
Height (exhaust) | 2,870 mm (113 in) |
Wheel base |
2WD: 2,690 mm (106.0 in) 4WD: 2,430 mm (96.0 in) |
Weight |
2WD: 5,730 kg (12,630 lbs) 4WD: 6,170 kg (13,600 lbs) |
Fuel tank capacity | 227.1 liters (60 US gal.; 50 Imp. gal) |
Battery | 12V |
Cabin type | Acousta cab |
Engine | |
Engine model | Allis Chalmers 649T |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 4.9 L, 4,932 cm2, (301.0 cu·in) |
Bore and stroke | 98.0 mm X 108.0 mm (3.86 in X 4.25 in) |
Compression ratio | 15.5:1 |
Horsepower | 120.6 PS (88.7 kW; 119.0 HP) at 2,300 rpm |
Starter | Electric |
Oil capacity: | 15.1 L (16 US. qt, 13.3 Imp. qt.) |
Coolant capacity: | 24.6 L (26 US. qt, 21.6 Imp. qt.) |
|
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 FWA 4WD (optional) |
Steering type | Hydrostatic power |
Brakes | Differential hydraulic wet discs |
Transmission model | Power Director |
Transmission type | Partial power shift |
Gears | 16 forward and 4 reverse |
Speed | Forward: 30.2 kmh (18.8 mph) Reverse: 13.5 (8.4 mph) |
Transmission oil capacity | 28.0 L (7.4 US. gal, 6.2 Imp. gal.) |
Transmission model | Power Director |
Transmission type | Partial power shift |
Gears | 20 forward and 4 reverse |
Speed | Forward: 30.2 kmh (18.8 mph) Reverse: 13.5 (8.4 mph) |
Transmission oil capacity | 28.0 L (7.4 US. gal, 6.2 Imp. gal.) |
Transmission model | – |
Transmission type | Power shift |
Gears | 12 forward and 2 reverse |
Speed | Forward: 29.6 kmh (18.4 mph) Reverse: 12.7 (7.9 mph) |
Transmission oil capacity | 28.0 L (7.4 US. gal, 6.2 Imp. gal.) |
Tires | |
Front tires | Ag: 10.00-16 (2WD), 13.6-28 (4WD) |
Rear tires | Ag: 18.4-38 |
|
Three-Point Hitch | |
Caterogy | II |
Control type | – |
Lift capacity (at 610 mm /24 in) | 3,030 kg (6,680 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540/1,000 rpm |
Hydraulic system | |
Hydraulic type | Load-sensitive |
Valves | 2 or 3 |
Pump flow |
22.0 gpm (83.3 lpm) Transmission: 13.5 gpm (51.1 lpm) |
Steering flow | 9.5 gpm (36 lpm) |
Total flow | 45.0 gpm (170.3 lpm) |
Maybe that’s all the information about the Allis Chalmers 8010 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you