Allis Chalmers 8070

Specifications & Review Allis Chalmers 8070 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

Allis Chalmers 8070The Allis Chalmers 8070 is a 2WD or 4WD row-crop tractor manufactured by Allis Chalmers in West Allis, Wisconsin, USA from 1982 to 1985. The Allis Chalmers 8070 is equipped with a 7.0 L (425.9 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 20 forward and 4 reverse gears or a power shift transmission with 12 forward and 2 reverse gears.

The Allis Chalmers 8070 row-crop tractor used the Allis Chalmers 670I engine. It is a 7.0 L, 6,980 cm2, (426.0 cu·in) six-cylinder turbocharged and intercooled diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 15.5:1. This engine produced 172.4 PS (126.8 kW; 170.0 HP) at 2,400 rpm of PTO output power.

The Allis Chalmers 8070 is equipped with hydrostatic power steering, differential hydraulic wet discs brakes, the Acousta-Cab with heat and air-conditioning, and 227.0 liters (60 US gal.; 49.9 Imp. gal) fuel tank.


Allis Chalmers 8070 Specifications

General Specifications
Model Allis Chalmers 8070
Length 4,740 mm (186.6 in)
Width 2,420 mm (95.3 in)
Long axle: 3,030 mm ( 119.5 in)
Height (Cab) 2,940 mm (115.7 in)
Wheel base
Weight 2WD Duals: 7,645 kg (16,855 lbs)
4WD: 7,850 kg (17,300 lbs)
Fuel tank capacity 227.0 liters (60 US gal.; 49.9 Imp. gal)
Battery 12V
Cabin type Acousta-Cab with heat and air-conditioning
Engine
Engine model Allis Chalmers 670I
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.0 L, 6,980 cm2, (426.0 cu·in)
Bore and stroke 108.0 mm X 127.0 mm (4.25 in X 5 in)
Compression ratio 15.5:1
Horsepower 172.4 PS (126.8 kW; 170.0 HP) at 2,400 rpm
Starter Electric
Oil capacity: With 2 full flow filter: 18.0 L (19.0 US. qt, 15.8 Imp. qt.)
With 3 oil filter: 21.0 L (22.2 US.qt, 18.5 Imp. qt.)
Coolant capacity: 34.0 L (36.0 US. qt, 30.0 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Differential hydraulic wet discs
Differential lock Foot-button
Transmission model Allis-Chalmers Power Director
Transmission type Partial power shift
Gears 20 forward and 4 reverse
Speed Forward: 26.9 kmh (16.7 mph) Reverse: 12.1 (7.5 mph)
Transmission oil capacity 28.0 L (7.4 US. gal, 6.2 Imp. gal.)
Transmission model
Transmission type Power shift
Gears 12 forward and 2 reverse
Speed Forward: 26.2 kmh (16.3 mph) Reverse: 11.4 (7.1 mph)
Transmission oil capacity 28.0 L (7.4 US. gal, 6.2 Imp. gal.)
Tires
Front tires Ag: 10.00-16 (2WD), 13.6-28 (4WD)
Rear tires Ag: 18.4-38

Three-Point Hitch
Caterogy III/II
Control type
Lift capacity (at 610 mm / 24 in) 3,720 kg (8,200 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type Closed-center load-sensitive
Valves 2 or 3
Pump flow 22.0 gpm (83.3 lpm)
Transmission: 13.5 gpm (51.1 lpm)
Steering flow 9.5 gpm (36 lpm)
Total flow 45.0 gpm (170.3 lpm)

Maybe that’s all the information about the Allis Chalmers 8070 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment