Specifications & Review Case IH 9210 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..
The Case IH 9210 is a four-wheel drive (4WD) tractor from 9200 series, manufactured by Case IH on the factory in Fargo ( North Dakota, USA) since 1990 to 1995. The Case IH 9210 tractor is equipped with CDC diesel engine with 8.3 L (504.5 cu in) of displacement and full powershift transmission with 12 forward and 3 reverse gears.
The Case International 9210 tractor used a six-cylinder liquid-cooled turbocharged diesel engine from the Consolidated Diesel Company (CDC) with 8.3 L (504.5 cu-in) of displacement and 114.0 mm (4.5 in) of the cylinder bore and 135.0 mm (5.3 in) of the piston stroke. Compression ratio rating is 16.5:1. The engine produced 200.0 HP (149 kW) of horsepower and 847.5 Nm (625 lb-ft) at 1,500 rpm of torque.
|
The Case IH 9210 is equipped with full powershift transmission operated with two right-hand levers. The transmission has 12 forward (3.5-29.4 km/h, 2.2-18.2 mph) and 3 reverse (4.5-14.5 km/h, 2.8-9.0 mph) gears.
The tractor used the standard cab with the air-conditioning system. Deluxe cab available as an option. It has side and rear window wipers and internal storage compartments.
Case IH 9210 Specifications
General Specifications | |
Model | Case IH 9210 |
Length | 6,130 mm (241.6 in.) |
Width | 3,030 mm (119.5 in.) |
Height | 3,290 mm (129.6 in.) |
Wheelbase | 3,050 mm (120.4 in.) |
Weight | 7,710 kg (17,000 lb.) |
Fuel tank capacity | 435 L (115 US. gal.) |
Battery | 12V |
Tires size | |
Front tires | 18.4-38 |
Rear tires | 18.4-38 |
|
Engine | |
Engine model | CDC (Consolidated Diesel Company) |
Fuel | Diesel |
Displacement | 8.3 L (504.5 cu.in.) |
Bore x stroke | 114.0 x 135.0 mm (4.5 x 5.3 in) |
Power output | 200.0 HP (149 kW) |
Torque | 847.5 Nm (625 lb-ft) at 1,500 rpm |
Starter type | Electric starter |
Oil type | – |
Oil capacity | 20.8 L (22 qts.) |
Coolant capacity | 33.2 L (35 qts.) |
|
Transmission and chassis | |
Chassis | 4×4 (4WD) |
Steering | Hydrostatic with articulation and front-axle steering |
Transmission type | Full power shift transmission |
Gears | 12 forward and 3 reverse gears |
Ground speed |
Forward: 3.5-29.4 km/h (2.2-18.2 mph) Reverse: 4.5-14.5 km/h (2.8-9.0 mph) |
PTO (Power take-off shaft) | |
PTO Type: | Rear, independent type (option) |
PTO Speed: | 1,000 rpm |
Hydraulic lift | |
3-point linkage: | Category III |
Pump capacity: | – |
Control system: | option |
No. of remote valves: | – |
Max lifting capacity (at link end): | 5,783 kg (12,750 lb.) |
Hydraulic system | |
Type: | Closed center, load sensing, pressure compensating |
Hydraulic luid capacity: | 68.0 L (18 gal.) |
Pressure | 172 bar (2,500 psi) |
Maybe that’s all the information about the Case IH 9210 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you