CaseIH 7150

Specifications & Review CaseIH 7150 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

CaseIH 7150The CaseIH 7150 is a 4WD row-crop tractor from the Magnum series. This tractor was manufactured by CaseIH in Racine, Wisconsin, USA from 1990 to 1993. The CaseIH 7150 is equipped with an 8.3 L (504.5 cu·in) six-cylinder diesel engine and a full powershift transmission with 18 forward and 4 reverse gears and wet disc clutch.

The CaseIH 7150 row-crop tractor used the CDC engine. It is a 8.3 L, 8,267 cm2, (504.5 cu·in) six-cylinder turbocharged intercooled diesel engine with 114.0 mm (4.49 in) of the cylinder bore and 135.0 mm (5.31 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 218 PS (160.3 kW; 215.0 HP) at 2,200 rpm of output power.
The Case IH 7150 Magnum is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, Silent Guardian II Cab with air-conditioning (standard), and 359.6 liters (95 US gal.; 79.1 Imp. gal) fuel tank.


CaseIH 7150 Specifications

General Specifications
Model CaseIH 7150 Magnum
Length
Width
Height
Wheel base
Weight (operating) 8,430 kg (18,585 lbs)
Fuel tank capacity 359.6 liters (95 US gal.; 79.1 Imp. gal)
Battery Two 12V, CCA 950A
Cabin type Silent Guardian II Cab with air-conditioning (standard)
Engine
Engine model CDC
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.3 L, 8,267 cm2, (504.5 cu·in)
Bore and stroke 114.0 mm X 135.0 mm (4.49 in X 5.31 in)
Compression ratio 16.5:1
Horsepower 218 PS (160.3 kW; 215.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 19.9 L (21 US. qt, 17.5 Imp. qt.)
Coolant capacity: 28.4 L (30 US. qt, 25 Imp. qt.)

Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Differential hydraulic wet disc
Transmission model CaseIH
Transmission type Full power shift with wet disc clutch
Gears 18 forward and 4 reverse
Speed Forward: 32.8 kmh (20.4 mph) Reverse: 11.9 (7.4 mph)
Tires
Front tires Ag: 16.9-26
Rear tires Ag: 20.8-38

Three-Point Hitch
Category III
Control type Electronic lower link
Lift capacity (at 610 mm/ 24 in) 5,769 kg (12,720 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with wet disc clutch
Rear PTO speed 1000 rpm
Hydraulic system
Hydraulic type Closed center pressure flow compensated (PFC)
Hydraulic capacity 191.1 L (50.5 US. gal, 42 Imp. gal.)
Pressure 2600 psi (179.3 bar)
Valves 2 to 4
Pump flow 22.0 gpm (83.3 lpm)
Total flow 29.0 gpm (109.8 lpm)

Maybe that’s all the information about the CaseIH 7150 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment