CaseIH 895

Specifications & Review CaseIH 895 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

CaseIH 895The CaseIH 895 is a 2WD or 4WD utility tractor from the 95 Utility series. This tractor was manufactured by CaseIH in Doncaster, England from 1991 to 1994. The CaseIH 895 is equipped with a 4.4 L (268.0 cu·in) four-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with 8 forward and 4 reverse gears, a partial power shift transmission with 16 forward and 8 reverse gears or a synchronized shuttle transmission with 8 forward and 8 reverse gears.

The Case IH 895 utility tractor used the Case IH D268 engine. It is a 4.4 L, 4,392 cm2, (268.0 cu·in) four-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 140.0 mm (5.51 in) of the piston stroke. This engine produced 85.1 PS (62.6 kW; 84.0 HP) at 2,400 rpm of output power.

The CaseIH 895 is equipped with power steering, hydraulic wet disc brakes, two-post ROPS or cab (optional), and 75.7 liters (20 US gal.; 16.7 Imp. gal) fuel tank.

Following attachments are available for the CaseIH 895 utility tractor:

  • Case IH 2250 loader
  • Case IH 2255 loader

CaseIH 895 Specifications

General Specifications
Model CaseIH 895
Length 3,600 mm (141.7 in)
Width 1,980 mm (78 in)
Height ROPS: 2,470 mm (97.2 in)
Cab: 2,590 mm (102 in)
Wheel base 2,250 mm (88.6 in)
Ground clearance (front axle) 2WD: 550 mm (21.7 in)
4WD: 390 mm (15.4 in)
Weight (shipping) 2WD ROPS: 2,750 kg (6,065 lbs)
2WD Cab: 3,115 kg (6,870 lbs)
4WD ROPS: 3,280 kg (7,225 lbs)
4WD Cab: 3,640 kg (8,025 lbs)
Fuel tank capacity 75.7 liters (20 US gal.; 16.7 Imp. gal)
Battery 12V
Cabin type Two-post ROPS or Cab (optional)
Engine
Engine model Case IH D268
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.4 L, 4,392 cm2, (268.0 cu·in)
Bore and stroke 100.0 mm X 140.0 mm (3.94 in X 5.51 in)
Horsepower 85.1 PS (62.6 kW; 84.0 HP) at 2,400 rpm
Starter Electric
Oil capacity: 9.8 L (10.4 US. qt, 8.6 Imp. qt.)
Coolant capacity: 13.7 L (14.5 US. qt, 12.1 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Transmission model
Transmission type Partially synchronized with dry disc clutch
Gears 8 forward and 4 reverse
Speed Forward: 31.8 kmh (19.8 mph) Reverse: 10.0 (6.2 mph)
Transmission oil capacity 34.1 L (9 US. gal, 7.5 Imp. gal.)
Transmission model
Transmission type Partial power shift
Gears 16 forward and 8 reverse
Speed Forward: 31.8 kmh (19.8 mph) Reverse: 10.0 (6.2 mph)
Transmission oil capacity 34.1 L (9 US. gal, 7.5 Imp. gal.)
Transmission model
Transmission type Synchronized shuttle
Gears 8 forward and 8 reverse
Speed Forward: 31.8 kmh (19.8 mph) Reverse: 40.5 (25.2 mph)
Transmission oil capacity 34.1 L (9 US. gal, 7.5 Imp. gal.)
Tires
Front tires Ag: 7.50-16
Rear tires Ag: 16.9-24

Three-Point Hitch
Category II
Control type
Lift capacity (at ends) 1,662 kg (3,665 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540, 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 34.1 L (9 US. gal, 7.5 Imp. gal.)
Valves 1
Pump flow 15.8 gpm (59.8 lpm)

Maybe that’s all the information about the CaseIH 895 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment