Challenger 1050

Specifications & Review Challenger 1050 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

Challenger 1050The Challenger 1050 is a 4WD row-crop tractor from the 1000 series. This tractor has been manufactured by Challenger (a part of AGCO) in Marktoberdoft, Germany since 2017. The Challenger 1050 is equipped with a 12.4 L (756.7 cu·in) six-cylinder diesel engine and a continuously-variable transmission with infinite forward and reverse gears.

The Challenger 1050 row-crop tractor used the MAN engine. It is a 12.4 L, 12,400 cm2, (756.7 cu·in) six-cylinder turbocharged diesel engine with 126.0 mm (4.96 in) of the cylinder bore and 166.0 mm (6.54 in) of the piston stroke. This engine produced 524.3 PS (385.5 kW; 517.0 HP) at 1,700 rpm of output power and 2400 N·m (244.7 kg·m, 1768.8 ft·lb) at 1,450 rpm of torque.

The Challenger 1050 is equipped with power steering, hydraulic wet disc brakes, cab with air-conditioning, and 798.6 liters (211.0 US gal.; 175.7 Imp. gal) fuel tank.

Challenger 1050 Specifications

General Specifications
Model Challenger 1050
Length 6,140 mm (241.7 in)
Width 3,000 mm (118.1 in)
Height (cab) 3,560 mm (140.2 in)
Wheel base 3,300 mm (129.9 in)
Ground clearance 590 mm (23.2 in)
Weight (shipping) 14,850 kg (32,739 lbs)
Fuel tank capacity 798.6 liters (211.0 US gal.; 175.7 Imp. gal)
Battery Two 12V
Cabin type Cab with air-conditioning
Engine model MAN
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 12.4 L, 12,400 cm2, (756.7 cu·in)
Bore and stroke 126.0 mm X 166.0 mm (4.96 in X 6.54 in)
Horsepower 524.3 PS (385.5 kW; 517.0 HP) at 1,700 rpm
Torque 2400 N·m (244.7 kg·m, 1768.8 ft·lb) at 1,450 rpm
Starter Electric

Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Transmission model Accu-VT
Transmission type Continuously-variable transmission
Gears Infinite forward and reverse
Front tires Ag: 650/65R38
Rear tires Ag: 750/75R46

Three-Point Hitch
Category IV/IVN
Control type
Lift capacity (at ends) 8,450 kg (18,630 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000/1000E rpm
Hydraulic system
Hydraulic type Load-sensing
Valves Up to 6
Pump flow 58.0 gpm (219.6 lpm)
113.5 gpm (429.6 lpm)

Maybe that’s all the information about the Challenger 1050 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment