Specifications & Review Deutz-Allis 5215 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..
The Deutz-Allis 5215 is a 2WD or 4WD compact utility tractor from the 5200 Compact series. This tractor was manufactured by Hinomoto for distributor Deutz-Allis in from 1987 to 1989. The Deutz-Allis 5215 is equipped with a 1.0 L (61.1 cu·in) three-cylinder diesel engine and one of two transmissions: a synchromesh transmission with 9 forward and 3 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.
The Deutz-Allis 5215 compact utility tractor used the Toyosha engine. It is a 1.0 L, 1,002 cm2, (61.1 cu·in) three-cylinder natural aspirated diesel engine with 73.0 mm (2.87 in) of the cylinder bore and 80.0 mm (3.15 in) of the piston stroke. The compression ratio rating is 23:1. This engine produced 18.2 PS (13.4 kW; 18.0 HP) at 2,500 rpm of output power.
The Deutz-Allis 5215 is equipped with manual steering, differential mechanical drum brakes, two-post ROPS and 14.0 liters (3.7 US gal.; 3.1 Imp. gal) fuel tank.
Deutz-Allis 5215 Specifications
General Specifications
Model
Deutz-Allis 5215
Length
2,730 mm (107.5 in)
Width
1,130 mm (44.5 in)
Height (ROPS)
2WD: 1,850 mm (72.8 in) 4WD: 1,840 mm (72.4 in)
Wheel base
1,400 mm (55.1 in)
Ground clearance (front axle)
2WD: 320 mm (12.6 in) 4WD: 260 mm (10.2 in)
Weight
2WD Hydro: 690 kg (1,521 lbs) 4WD Hydro: 785 kg (1,731 lbs)
Fuel tank capacity
14.0 liters (3.7 US gal.; 3.1 Imp. gal)
Battery
Cabin type
Two-post ROPS. Optional canopy and soft cab.
Engine
Engine model
Toyosha
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
3
Fuel type
Diesel
Displacement
1.0 L, 1,002 cm2, (61.1 cu·in)
Bore and stroke
73.0 mm X 80.0 mm (2.87 in X 3.15 in)
Compression ratio
23:1
Horsepower
18.2 PS (13.4 kW; 18.0 HP) at 2,500 rpm
Starter
Electric
Oil capacity:
2.6 L (2.7 US. qt, 2.3 Imp. qt.)
Coolant capacity:
3.5 L (3.7 US. qt, 3.1 Imp. qt.)
Transmission and chassis
Chassis
4×2 2WD or 4×4 MFWD 4WD (optional)
Steering type
Manual
Brakes
Differential mechanical drum
Transmission model
–
Transmission type
Synchromesh
Gears
9 forward and 3 reverse
Transmission model
–
Transmission type
Hydrostatic
Gears
Infinite (3-range) forward and reverse
Speed
Forward: 17.1 kmh (10.6 mph) Reverse: kmh (0 mph)
Transmission oil capacity
17.0 L (4.5 US. gal, 3.7 Imp. gal.)
Tires
Front tires
Ag: 5.00-10 (2WD), 6.00-12 (4WD)
Rear tires
Ag: 9.5-16
Three-Point Hitch
Category
I
Control type
–
Lift capacity (at ends)
550 kg (1213 lbs)
PTO (Power take-off shaft)
Middle PTO type
Independent
Middle PTO speed
2114 rpm
Rear PTO type
Independent
Rear PTO speed
540 rpm
Hydraulic system
Hydraulic type
–
Hydraulic capacity
4.5 L (1.2 US. gal, 1 Imp. gal.)
Valves
0 to 2
Total flow
3.56 gpm (13.5 lpm)
Maybe that’s all the information about the Deutz-Allis 5215 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The Deutz-Allis 5215 is a 2WD or 4WD compact utility tractor from the 5200 Compact series. This tractor was manufactured by Hinomoto for distributor Deutz-Allis in from 1987 to 1989. The Deutz-Allis 5215 is equipped with a 1.0 L (61.1 cu·in) three-cylinder diesel engine and one of two transmissions: a synchromesh transmission with 9 forward and 3 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.
