Farmall 130

Specifications & Review Farmall 130 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

Farmall 130The Farmall 130 is a 2WD row-crop tractor manufactured by Farmall (a part of International Harvester) from 1956 to 1958. The Farmall 130 is equipped with a 2.0 L (122.7 cu·in) four-cylinder gasoline engine and a sliding gear transmission with 4 forward and 1 reverse gears and dry disc clutch.

The Farmall 130 row-crop tractor used the International Harvester C-123 engine. It is a 2.0 L, 2,011 cm2, (122.7 cu·in) four-cylinder natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 6.8:1.

The Farmall 130 is equipped with manual steering, differential mechanical contracting band brakes, open operator station and 41.6 liters (11 US gal.; 9.2 Imp. gal) fuel tank.


Farmall 130 Specifications

General Specifications
Model Farmall 130
Length 2,710 mm (106.7 in)
Width 1,420 mm (55.9 in)
Height (steering wheel) 1,650 mm (65 in)
Wheel base 1,800 mm (70.9 in)
Ground clearance 550 mm (21.7 in)
High crop: 680 mm (26.8 in)
Weight (operating) 1,270 kg (2,800 lbs)
Fuel tank capacity 41.6 liters (11 US gal.; 9.2 Imp. gal)
Battery 12V
Cabin type Open operator station
Engine
Engine model International Harvester C-123
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Gasoline
Displacement 2.0 L, 2,011 cm2, (122.7 cu·in)
Bore and stroke 79.0 mm X 102.0 mm (3.11 in X 4.02 in)
Compression ratio 6.8:1
Horsepower
Starter Electric
Oil capacity: 4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity: 14.2 L (15 US. qt, 12.5 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Differential mechanical contracting band
Transmission model
Transmission type Sliding gear with dry disc clutch
Gears 4 forward and 1 reverse
Speed Forward: 16.1 kmh (10.0 mph) Reverse: 4.7 kmh (2.9 mph)
Tires
Front tires Ag: 5.00×15
Rear tires Ag: 9.00×24

Three-Point Hitch
Category IH Fast-Hitch (1-arm)
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type
Rear PTO speed 540 rpm

Maybe that’s all the information about the Farmall 130 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment