Specifications & Review Farmall 1468 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..
The Farmall 1468 is a 2WD row-crop tractor manufactured by Farmall (a part of International Harvester) in Rock Island, Illinois, USA from 1971 to 1974. The Farmall 1468 is equipped with a 9.0 L (548.7 cu·in) eight-cylinder diesel engine and one of two transmissions: a sliding gear transmission with 8 forward and 4 reverse gears or a two-speed power shift transmission with 16 forward and 8 reverse gears.
The Farmall 1468 row-crop tractor used the International DV-550 engine. It is a 9.0 L, 8,991 cm2, (548.7 cu·in) eight-cylinder natural aspirated diesel engine with 114.0 mm (4.49 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 147 PS (108.1 kW; 145.0 HP) at 2,600 rpm of PTO output power.
The Farmall 1468 is equipped with hydrostatic power steering, independent hydraulic dry disc brakes, cab (standard), and 159.0 liters (42 US gal.; 35 Imp. gal) fuel tank.
|
Farmall 1468 Specifications
General Specifications | |
Model | Farmall 1468 |
Length | 4,260 mm (167.7 in) |
Width | 2,480 mm (97.6 in) |
Height (exhaust) | 2,810 mm (110.6 in) |
Wheel base | 2,655 mm (104.5 in) |
Ground clearance | 400 mm (15.7 in) |
Weight | 5,375 kg (11,850 lbs) |
Fuel tank capacity | 159.0 liters (42 US gal.; 35 Imp. gal) |
Battery | 12V |
Cabin type | Cab (standard) |
Engine | |
Engine model | International DV-550 |
Engine type | Four-stroke, liquid-cooled, V |
Cylinders | 8 |
Fuel type | Diesel |
Displacement | 9.0 L, 8,991 cm2, (548.7 cu·in) |
Bore and stroke | 114.0 mm X 110.0 mm (4.49 in X 4.33 in) |
Horsepower | 147 PS (108.1 kW; 145.0 HP) at 2,600 rpm |
Starter | Electric |
Oil capacity: | 13.5 L (14.3 US. qt, 11.9 Imp. qt.) |
Coolant capacity: | 25.5 L (26.9 US. qt, 22.4 Imp. qt.) |
|
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Hydrostatic power |
Brakes | Independent hydraulic dry disc |
Transmission model | – |
Transmission type | Sliding gear with dry disc clutch |
Gears | 8 forward and 4 reverse |
Speed | Forward: 32.6 kmh (20.3 mph) Reverse: 16.1 kmh (10 mph) |
Transmission model | Torque Amplifier |
Transmission type | Two-speed power shift with dry disc clutch |
Gears | 16 forward and 8 reverse |
Speed | Forward: 32.6 kmh (20.3 mph) Reverse: 16.1 kmh (10 mph) |
Tires | |
Front tires | Ag: 11L-16 |
Rear tires | Ag: 18.4-38 |
|
Three-Point Hitch | |
Category | III/II |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with dry disc clutch |
Rear PTO speed | 1000 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 45.4 L (12 US. gal, 10 Imp. gal.) |
Pump flow | 12.0 gpm (45.4 lpm) |
Maybe that’s all the information about the Farmall 1468 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you