Specifications & Review Farmall F-20 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..
The Farmall F20 is a 2WD row-crop tractor manufactured by Farmall (a part of International Harvester) in Rock Island, Illinois, USA from 1932 to 1939. The Farmall F-20 is equipped with a 3.6 L (220.9 cu·in) four-cylinder engine and a sliding gear with mechanical dry disc clutch transmission with 4 forward and 1 reverse gear.
The Farmall F-20 row-crop tractor used the International Harvester engine. It is a 3.6 L, 3,620 cm2, (220.9 cu·in) four-cylinder natural aspirated engine with 95.0 mm (3.74 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 27.1 PS (19.9 kW; 26.7 HP) at 1,200 rpm of PTO output power.
The Farmall F-20 is equipped with manual steering, mechanical band brakes, open operator station, and 49.2 liters (13 US gal.; 10.8 Imp. gal) fuel tank.
Farmall F-20 Specifications
General Specifications
Model
Farmall F20
Length
3,550 mm (139.8 in)
Width
2,180 mm (85.8 in)
Height
1,700 mm (66.9 in)
Wheel base
2,150 mm (84.6 in)
Weight
1,995 kg (4,398 lbs)
Fuel tank capacity
49.2 liters (13 US gal.; 10.8 Imp. gal)
Battery
Cabin type
Open operator station
Engine
Engine model
International Harvester
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
4
Fuel type
Distillate
Displacement
3.6 L, 3,620 cm2, (220.9 cu·in)
Bore and stroke
95.0 mm X 127.0 mm (3.74 in X 5 in)
Horsepower
27.1 PS (19.9 kW; 26.7 HP) at 1,200 rpm
Starter
Electric
Coolant capacity:
Early: 37.9 L (40 US. qt, 33.3 Imp. qt.) Later: 27.4 L (29 US. qt, 24.1 Imp. qt.)
Transmission and chassis
Chassis
4×2 2WD
Steering type
Manual
Brakes
Mechanical band
Transmission model
–
Transmission type
Sliding gear with mechanical dry disc clutch
Gears
4 forward and 1 reverse
Speed
Forward: 6.0 kmh (3.7 mph) Reverse: 4.4 (2.7 mph)
Tires
Front tires
Ag: 25×4 (steel)
Rear tires
Ag: 40×6 (steel), 42×12 (steel), 9.00×36
PTO (Power take-off shaft)
Rear PTO type
Transmission
Rear PTO speed
540 rpm
Maybe that’s all the information about the Farmall F-20 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The Farmall F20 is a 2WD row-crop tractor manufactured by Farmall (a part of International Harvester) in Rock Island, Illinois, USA from 1932 to 1939. The Farmall F-20 is equipped with a 3.6 L (220.9 cu·in) four-cylinder engine and a sliding gear with mechanical dry disc clutch transmission with 4 forward and 1 reverse gear.
