Farmall M

Specifications & Review Farmall M Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

Farmall M tractorThe Farmall M is a 2WD row-crop tractor manufactured by the Farmall (a part of International Harvester) in Rock Island, Illinois, USA from 1939 to 1954. The Farmall M is equipped with 4.1 L four-cylinder gasoline or distillate engine and sliding gear transmission with 5 forward and 1 reverse gear.

The Farmall M row-crop tractor is equipped with manual steering, mechanical contracting band brakes, open operator station and 79.5 liters (21 US gal.; 17.5 Imp. gal) fuel tank.

The tractor could be equipped with the following engines:

  • International Harvester. It is a 4.1 L, 4,059 cm2, (247.7 cu·in) four-cylinder natural aspirated distillate engine with 98.0 mm (3.86 in) of the cylinder bore and 133.0 mm (5.24 in) of the piston stroke. The compression ratio rating is 4.75:1 or 4.5:1.
  • International Harvester C248. It is a 4.1 L, 4,059 cm2, (247.7 cu·in) four-cylinder natural aspirated gasoline engine. The cylinder bore is 98.0 mm (3.86 in) and the piston stroke is 133.0 mm (5.24 in). The compression ratio rating is 5.65:1.

Farmall M Specifications

General Specifications
Model Farmall M
Length 3,370 mm (132.7 in)
Width 2,130 mm (83.9 in)
Height 1,980 mm (78 in)
Wheel base
Weight 3,070 kg (6,768 lbs)
Fuel tank capacity 79.5 liters (21 US gal.; 17.5 Imp. gal)
Battery 6V
Cabin type Open operator station
Engine
Engine model International Harvester
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Distillate or kerosene
Displacement 4.1 L, 4,059 cm2, (247.7 cu·in)
Bore and stroke 98.0 mm X 133.0 mm (3.86 in X 5.24 in)
Compression ratio 4.75:1 or 4.5:1
Horsepower
Oil capacity: 7.6 L (8.0 US. qt, 6.7 Imp. qt.)
Coolant capacity: 22.7 L (24.0 US. qt, 20.0 Imp. qt.)
Spark plug gap 0.635 mm (0.025 in)
Engine
Engine model International Harvester C248
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Gasoline
Displacement 4.1 L, 4,059 cm2, (247.7 cu·in)
Bore and stroke 98.0 mm X 133.0 mm (3.86 in X 5.24 in)
Compression ratio 5.65:1
Horsepower
Oil capacity: 7.6 L (8.0 US. qt, 6.7 Imp. qt.)
Coolant capacity: 22.7 L (24.0 US. qt, 20.0 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Mechanical contracting band
Transmission model
Transmission type Sliding gear
Gears 5 forward and 1 reverse
Speed Forward: 26.3 kmh (16.3 mph) Reverse: 5.0 (3.1 mph)
Tires
Front tires Ag: 6.00-16, 22.50×4 (steel)
Rear tires Ag: 11-38, 51×8 (steel), 10-38, 12-38, 11.25-36

PTO (Power take-off shaft)
Rear PTO type
Rear PTO spped 540 rpm
Hydraulic system
Pressure Early: 500 psi (34.5 bar)
Later: 800 psi (55.2 bar)

Maybe that’s all the information about the Farmall M tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment