Ford 2810

Specifications & Review Ford 2810 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

Ford 2810The Ford 2810 is a 2WD or 4WD utility tractor from the 10 Utility series. This tractor was manufactured by Ford from 1983 to 1990. The Ford 2810 is equipped with a 2.6 L (158.0 cu·in) three-cylinder diesel engine and one of two transmissions: a dual range transmission with 8 forward and 2 reverse gears or a mechanical shuttle transmission with 6 forward and 4 reverse gears.

The Ford 2810 utility tractor used the Ford engine. It is a 2.6 L, 2,589 cm2, (158.0 cu·in) three-cylinder natural aspirated diesel engine with 107.0 mm (4.21 in) of the cylinder bore and 97.0 mm (3.82 in) of the piston stroke. The compression ratio rating is 17.3:1. This engine produced 34.8 PS (25.6 kW; 34.3 HP) at 2,000 rpm of output power.

The Ford 2810 is equipped with manual or power assist steering, differential wet disc brakes, an open operator station with two-post fixed ROPS, and 49.2 liters (13 US gal.; 10.8 Imp. gal) fuel tank for 2WD version or 60.6 liters (16 US gal, 13.3 Imp. gal) for 4WD version.

Following attachments are available for the Ford 2810 utility tractor:

  • Ford 776A loader
  • Ford 776B loader
  • Ford 776F loader

Ford 2810 Specifications

General Specifications
Model Ford 2810
Length 3,230 mm (127.2 in)
Width 1,730 mm (68.1 in)
Height (ROPS) 2,370 mm (93.3 in)
Wheel base 2WD: 1,960 mm (77.2 in)
4WD: 2,130 mm (83.9 in)
Ground clearance (rear axle) 520 mm (20.5 in)
Fuel tank capacity 2WD: 49.2 liters (13.0 US gal.; 10.8 Imp. gal)
4WD: 60.6 liters (16.0 US gal, 13.3 Imp. gal)
Battery 12V, 51Ah
Cabin type Open operator station with two-post fixed ROPS
Engine model Ford
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.6 L, 2,589 cm2, (158.0 cu·in)
Bore and stroke 107.0 mm X 97.0 mm (4.21 in X 3.82 in)
Compression ratio 17.3:1
Horsepower 34.8 PS (25.6 kW; 34.3 HP) at 2,000 rpm
Torque 137.0 N·m (14.0 kg·m, 101.0 ft·lb) at 1,400 rpm
Starter Electric
Oil capacity: 6.6 L (7 US. qt, 5.8 Imp. qt.)
Coolant capacity: 10.4 L (11 US. qt, 9.2 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Manual or power assist
Brakes Differential wet disc
Final drive Inboard planetary
Differential lock Mechanical rear
Transmission model
Transmission type Dual Range
Gears 8 forward and 2 reverse
Speed Forward: 29.8 kmh (18.5 mph) Reverse: 14.3 kmh (8.9 mph)
Transmission oil capacity 12.0 L (3.2 US. gal, 2.6 Imp. gal.)
Transmission model
Transmission type Mechanical shuttle
Gears 6 forward and 4 reverse
Speed Forward: 28.8 kmh (17.9 mph) Reverse: 25.9 kmh (16.1 mph)
Front tires Ag: 6.00-16 (2WD), 8.3-24 (4WD)
Rear tires Ag: 13.6-28

Three-Point Hitch
Category I
Control type Position control
Lift capacity (at ends) 1,330 kg (2,935 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 45.8 L (12.1 US. gal, 10.1 Imp. gal.)
Pressure 2500 psi (172.4 bar)
Pump flow 7.7 gpm (29.1 lpm)

Maybe that’s all the information about the Ford 2810 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment