Ford 3910

Specifications & Review Ford 3910 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

Ford 3910The Ford 3910 is a 2WD or 4WD utility tractor from the 10 series. This tractor was manufactured by Ford from 1983 to 1989. The Ford 3910 is equipped with a 3.1 L (192.0 cu·in) three-cylinder diesel engine and one of three transmissions: the Dual Range transmission with 8 forward and 2 reverse gears, a synchromesh transmission with dry disc clutch and 8 forward and 4 reverse gears or a mechanical shuttle transmission with 6 forward and 4 reverse gears.

The Ford 3910 utility tractor used the Ford engine. It is a 3.1 L, 3,146 cm2, (192.0 cu·in) three-cylinder natural aspirated diesel engine with 112.0 mm (4.41 in) of the cylinder bore and 107.0 mm (4.21 in) of the piston stroke. The compression ratio rating is 16.3:1. This engine produced 50.7 PS (37.3 kW; 50.0 HP) at 2,200 rpm of gross output power and 187.1 N·m (19.1 kg·m, 137.9 ft·lb) at 1,400 rpm of torque.

The Ford 3910 is equipped with power assist steering, differential wet disc brakes, two-post fixed ROPS or Cab (optional), and 49.2 liters (13 US gal.; 10.8 Imp. gal) fuel tank. This tractor could be equipped with the Ford 776A/B loader.


Ford 3910 Specifications

General Specifications
Model Ford 3910
Length 3,230 mm (127.2 in)
Width 1,760 mm (69.3 in)
Height 2,370 mm (93.3 in)
Wheel base 2WD: 1,960 mm (77.2 in)
4WD: 2,130 mm (84.1 in)
Weight (operating) 2WD: 2,090 kg (4,615 lbs)
4WD: 2,305 kg (5,080 lbs)
Fuel tank capacity 49.2 liters (13 US gal.; 10.8 Imp. gal)
Battery 12V, 128Ah
Cabin type Two-post fixed ROPS or Cab (optional)
Engine
Engine model Ford
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 3.1 L, 3,146 cm2, (192.0 cu·in)
Bore and stroke 112.0 mm X 107.0 mm (4.41 in X 4.21 in)
Compression ratio 16.3:1
Horsepower 50.7 PS (37.3 kW; 50.0 HP) at 2,200 rpm
Torque 187.1 N·m (19.1 kg·m, 137.9 ft·lb) at 1,400 rpm
Starter Electric
Oil capacity: 6.6 L (7 US. qt, 5.8 Imp. qt.)
Coolant capacity: 10.4 L (11 US. qt, 9.2 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power assist
Brakes Differential wet disc
Final drive Planetary
Differential lock Mechanical rear
Transmission model Dual Range
Transmission type
Gears 8 forward and 2 reverse
Speed Forward: 29.8 kmh (18.5 mph) Reverse: 14.3 (8.9 mph)
Transmission oil capacity 12.0 L (3.2 US. gal, 2.6 Imp. gal.)
Transmission model
Transmission type Synchromesh with dry disc cluch
Gears 8 forward and 4 reverse
Speed Forward: 29.4 kmh (18.3 mph) Reverse: 10.7 (6.7 mph)
Transmission oil capacity 9.4 L (2.5 US. gal, 2.1 Imp. gal.)
Transmission model
Transmission type Mechanical shuttle
Gears 6 forward and 4 reverse
Speed Forward: 28.8 kmh (17.9 mph) Reverse: 25.9 (16.1 mph)
Tires
Front tires Ag: 7.50-15 (2WD), 8.3-24 (4WD)
Rear tires Ag: 13.6-28

Three-Point Hitch
Caterogy II/I
Control type Position and top-link draft control
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 45.8 L (12.1 US gal, 10.1 Imp. gal)
Pressure 2500 psi (172.4 bar)
Valves 1
Pump flow 7.7 gpm (29.1 ppm)
12.8 gpm (48.5 lpm)
Steering flow 3.6 gpm (13.6 lpm)

Maybe that’s all the information about the Ford 3910 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment