Ford 4000 (1962-1965)

Specifications & Review Ford 4000 (1962-1965) Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

Ford 4000 (1962-1965)The Ford 4000 is a 2WD utility tractor. The first generation of this tractor was manufactured by Ford in Highland Park, Michigan, USA from 1962 to 1965. The Ford 4000 is equipped with a 2.8 L four-cylinder engine and one of four variants of the transmission. The second generation was manufactured from 1965 to 1967 and the third from 1968 to 1975.

The Ford 4000 utility tractor used the Ford engine. It is a 2.8 L, 2,819 cm2, (172.0 cu·in) four-cylinder natural aspirated engine with 99.0 mm (3.9 in) of the cylinder bore and 91.0 mm (3.58 in) of the piston stroke. This engine had variants for diesel, gasoline, and LP-gas fuel. The compression ratio rating is 7.5:1 for gasoline version, 16.8:1 for diesel and 8.65:1 for LP-gas. The gasoline version produced 55.8 PS (41.0 kW; 55.0 HP) at 2,200 rpm of output power.

The Ford 4000 is equipped with manual steering for utility version or power steering for row-crop version, open operator station and 64.3 liters (17 US gal.; 14.1 Imp. gal) fuel tank.


Ford 4000 Specifications

General Specifications
Model Ford 4000
Length
Width
Height
Wheel base 2,140 mm (84.3 in)
Weight Utility: 1,435 kg (3,165 lbs)
Utility: 1,590 kg (3,505 lbs)
Fuel tank capacity 64.3 liters (17 US gal.; 14.1 Imp. gal)
Battery
Cabin type Open operator station
Engine
Engine model Ford
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel, gasoline, LP-gas
Displacement 2.8 L, 2,819 cm2, (172 cu·in)
Bore and stroke 99.0 mm X 91.0 mm (3.9 in X 3.58 in)
Compression ratio Gasoline: 7.5:1
Diesel: 16.8:1
LP-gas: 8.65:1
Horsepower 55.8 PS (41.0 kW; 55 HP) at 2,200 rpm
Starter Electric
Oil capacity: 4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity: 13.2 L (13.9 US. qt, 11.6 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type Utility: manual, Row-crop: power
Brakes
Transmission model
Transmission type Gear type
Gears 4 forward and 1 reverse
Transmission oil capacity 6.2 L (1.6 US. gal, 1.4 Imp. gal.)
Transmission model Ford Select-O-Speed
Transmission type Full power shift
Gears 10 forward and 2 reverse
Transmission model
Transmission type
Gears 5 forward and 1 reverse
Transmission oil capacity 7.6 L (2 US. gal, 1.7 Imp. gal.)
Transmission model
Transmission type Gear type with over / under
Gears 12 forward and 3 reverse
Tires
Front tires Ag: 6.00×16
Rear tires Ag: 13.6×28

Three-Point Hitch
Caterogy II/I
Control type
Lift capacity (at ends) 1,450 kg (3,195 lbs)
PTO (Power take-off shaft)
Rear PTO type Tranmission, live, independent
Rear PTO speed 540, 540/1,000 rpm
Hydraulic system
Hydraulic type Open center
Pump flow 5.4 gpm (20.4 lpm)

Maybe that’s all the information about the Ford 4000 (1962-1965) tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment