Ford 4000 (1965-1967)

Specifications & Review Ford 4000 (1965-1967) Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

Ford 4000 (1965-1967)The Ford 4000 is a 2WD utility tractor. This is the second gereration manufactured by Ford in Highland Park, Michigan, USA from 1965 to 1967. The first generation was manufactured from 1965 to 1967, the third generation from 1968 to 1975.

The Ford 4000 is equipped with one of three engines: a 3.1 L three-cylinder gasoline / LP-gas engine or 3.3 L three-cylinder diesel engine and one of two transmissions: the Dual Range transmission with 8 forward and 2 reverse gears or the Select-O-Speed transmission with 10 forward and 2 reverse gears.

The Ford 4000 used hydraulic power steering, mechanical wet disc brakes, open operator station and 60.5 liters (16.0 US gal.; 13.3 Imp. gal) fuel tank.

The tractor could be equipped with the following engines:

  • Ford gasoline / LP-gas engine. It is a 3.1 L, 3,146 cm2, (192.0 cu·in) three-cylinder natural aspirated gasoline engine with 112.0 mm (4.41 in) of the cylinder bore and 107.0 mm (4.21 in) of the piston stroke. The compression ratio rating is 8.0:1 for gasolione version.
  • Ford diesel engine. It is a 3.3 L, 3,294 cm2, (201.0 cu·in) three-cylinder natural aspirated diesel engine. The cylinder bore is 111.8 mm (4.4 in) and the piston stroke is 111.8 mm (4.4 in). The compression ratio rating is 16.5:1.

Ford 4000 Specifications

General Specifications
Model Ford 4000
Length 3,470 mm (136.6 in)
Width 1,710 mm (67.3 in)
Height 2,150 mm (84.6 in)
Wheel base 2,140 mm (84.3 in)
Weight 2,215 kg (4,885 lbs)
Fuel tank capacity 60.5 liters (16 US gal.; 13.3 Imp. gal)
Battery 12V, 80Ah (gasoline), 128Ah (diesel)
Cabin type Open operator station
Engine
Engine model Ford
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Gasoline
Displacement 3.1 L, 3146 cm2, (192.0 cu·in)
Bore and stroke 112.0 mm X 107.0 mm (4.41 in X 4.21 in)
Compression ratio Gasoline: 8.0:1
Horsepower
Starter Electric
Oil capacity: 7.6 L (8 US. qt, 6.7 Imp. qt.)
Coolant capacity: 13.2 L (13.9 US. qt, 11.6 Imp. qt.)
Engine
Engine model Ford
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 3.3 L, 3б294 cm2, (201.0 cu·in)
Bore and stroke 111.8 mm X 111.8 mm (4.4 in X 4.4 in)
Compression ratio 16.5:1
Horsepower
Starter Electric
Oil capacity: 7.6 L (8 US. qt, 6.7 Imp. qt.)
Coolant capacity: 13.2 L (13.9 US. qt, 11.6 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type Hydraulic power
Brakes Mechanical wet disc
Transmission model Dual Range
Transmission type Gear type
Gears 8 forward and 2 reverse
Speed Forward: 27.0 kmh (16.8 mph) Reverse: 13.0 (8.1 mph)
Transmission oil capacity 12.5 L (3.3 US. gal, 2.7 Imp. gal.)
With independent PTO: 16.0 L (4.2 US. gal, 3.5 Imp. gal.)
Transmission model Select-O-Speed
Transmission type Gear type
Gears 10 forward and 2 reverse
Speed Forward: 28.3 kmh (17.6 mph) Reverse: 8.2 (5.1 mph)
Transmission oil capacity 11.6 L (3.1 US. gal, 2.6 Imp. gal.)
Tires
Front tires Ag: 6.00-16
Rear tires Ag: 12.4-38

Three-Point Hitch
Caterogy II/I
Control type Position and draft control with double acting top
Lift capacity (at ends) 1,450 kg (3,200 lbs)
PTO (Power take-off shaft)
Rear PTO type Transmission or independent
Rear PTO speed 540, 1,000 rpm
Hydraulic system
Hydraulic type Open center
Pressure 2500 psi (172.4 bar)
Pump flow 5.0 gpm (18.9 lpm)
5.5 gpm (20.8 lpm)
Steering flow 4.5 gpm (17 lpm)

Maybe that’s all the information about the Ford 4000 (1965-1967) tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment