Specifications & Review Ford 6000 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..
The Ford 6000 is a 2WD row-crop tractor manufactured by Ford in Highland Park, Michigan, USA from 1961 to 1964.
The Ford 6000 is equipped with one of two engines: a 4.0 L (242.0 cu·in) six-cylinder natural aspirated diesel engine or a 3.7 L (223.0 cu·in) six-cylinder natural aspirated gasoline engine and a full powershift transmission with 10 forward and 2 reverse gears.
The tractor could be equipped with the following engines:
- Ford disel engine. It is a 4.0 L, 3,960 cm2, (242.0 cu·in) six-cylinder natural aspirated diesel engine with 92.0 mm (3.62 in) of the cylinder bore and 99.0 mm (3.9 in) of the piston stroke. The compression ratio rating is 16.2:1.
- Ford gasoline engine. It is a 3.7 L, 3,654 cm2, (223.0 cu·in) six-cylinder natural aspirated gasoline engine. The cylinder bore is 92.0 mm (3.62 in) and the piston stroke is 91.0 mm (3.58 in). The compression ratio rating is 8.4:1.
The Ford 6000 is equipped with power assist steering, differential hydraulic wet disc brakes, an open operator station, and 98.4 liters (26 US gal.; 21.6 Imp. gal) fuel tank.
|
Ford 6000 Specifications
General Specifications | |
Model | Ford 6000 |
Length | 3,780 mm (148.8 in) |
Width | – |
Height (hood) | 1,720 mm (67.7 in) |
Wheel base | 2,410 mm (94.9 in) |
Weight (shipping) | 2,950 kg (6,504 lbs) |
Fuel tank capacity | 98.4 liters (26 US gal.; 21.6 Imp. gal) |
Battery | |
Cabin type | Open operator station |
Engine | |
Engine model | Ford |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 4.0 L, 3,960 cm2, (242.0 cu·in) |
Bore and stroke | 92.0 mm X 99.0 mm (3.62 in X 3.9 in) |
Compression ratio | 16.2:1 |
Horsepower | – |
Starter | Electric |
Oil capacity: | 4.7 L (5 US. qt, 4.1 Imp. qt.) |
Coolant capacity: | 19.9 L (21 US. qt, 17.5 Imp. qt.) |
Engine | |
Engine model | Ford |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Gasoline |
Displacement | 3.7 L, 3,654 cm2, (223.0 cu·in) |
Bore and stroke | 92.0 mm X 91.0 mm (3.62 in X 3.58 in) |
Compression ratio | 8.4:1 |
Horsepower | – |
Starter | Electric |
Coolant capacity: | 19.9 L (21 US. qt, 17.5 Imp. qt.) |
|
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Power assist |
Brakes | Differential hydraulic wet disc |
Transmission model | Ford Select-O-Speed |
Transmission type | Full power shift |
Gears | 10 forward and 2 reverse |
Speed | Forward: 29.3 kmh (18.2 mph) Reverse: 8.4 kmh (5.2 mph) |
Transmission oil capacity | 2.8 L (0.7 US. gal, 0.6 Imp. gal.) |
Tires | |
Front tires | Ag: 6.00×16, 6.50×16, 9.00×10 |
Rear tires | Ag: 13.6×38, 15.5×38 |
|
Three-Point Hitch | |
Category | II |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | Closed center |
Hydraulic capacity | 13.2 L (3.5 US. gal, 2.9 Imp. gal.) |
Pressure | 1900 psi (131 bar) |
Pump flow | 4.5 gpm (17 lpm) |
Maybe that’s all the information about the Ford 6000 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you