Specifications & Review Ford 7000 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..
The Ford 7000 is a 2WD utility tractor manufactured by Ford from 1971 to 1975. The Ford 7000 is equipped with a 4.2 L (255.4 cu·in) four-cylinder diesel engine and one of two transmissions: a constant mesh transmission with 8 forward and 2 reverse gears or a dual power transmission with 16 forward and 4 reverse gears.
The Ford 7000 utility tractor used the Ford engine. It is a 4.2 L, 4,195 cm2, (256 cu·in) four-cylinder turbocharged diesel engine with 112.0 mm (4.41 in) of the cylinder bore and 107.0 mm (4.21 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 90.3 PS (66.4 kW; 89.0 HP) at 2,100 rpm of output power.
The Ford 7000 is equipped with manual or hydrostatic power (optional) steering, brakes, Open operator station and 75.7 liters (20 US gal.; 16.7 Imp. gal) fuel tank.
|
|
Ford 7000 Specifications
| General Specifications | |
| Model | Ford 7000 |
| Length | 3,590 mm (141.3 in) |
| Width | 1,730 mm (68.1 in) |
| Height (hood) | 1,540 mm (60.6 in) |
| Wheel base | 2,220 mm (87.4 in) |
| Ground clearance (front axle) | 450 mm (17.7 in) |
| Weight (operating) | 2,857 kg (6,299 lbs) |
| Fuel tank capacity | 75.7 liters (20 US gal.; 16.7 Imp. gal) |
| Battery | 12V, 128Ah |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Ford |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.2 L, 4,195 cm2, (256 cu·in) |
| Bore and stroke | 112.0 mm X 107.0 mm (4.41 in X 4.21 in) |
| Compression ratio | 16.5:1 |
| Horsepower | 90.3 PS (66.4 kW; 89.0 HP) at 2,100 rpm |
| Starter | Electric |
| Oil capacity: | 8.5 L (9 US. qt, 7.5 Imp. qt.) |
| Coolant capacity: | 13.7 L (14.5 US. qt, 12.1 Imp. qt.) |
|
|
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual or hydrostatic power (optional) |
| Brakes | – |
| Transmission model | – |
| Transmission type | Constant mesh |
| Gears | 8 forward and 2 reverse |
| Speed | Forward: 27.0 kmh (16.8 mph) Reverse: 13.0 kmh (8.1 mph) |
| Transmission oil capacity | 52.1 L (13.8 US. gal, 11.5 Imp. gal.) |
| Transmission model | – |
| Transmission type | Dual Power |
| Gears | 16 forward and 4 reverse |
| Tires | |
| Front tires | Ag: 6.00-16 |
| Rear tires | Ag: 13.6-38, 12.4-36 |
|
|
| Three-Point Hitch | |
| Category | II |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540, 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic pressure | 2500 psi (172.4 bar) |
| Valves | 2 |
| Pump flow | 6.0 gpm (22.7 lpm) |
| Steering flow | 2.74 gpm (10.4 lpm) |
| Total flow | 8.74 gpm (33.1 lpm) |
Maybe that’s all the information about the Ford 7000 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
