Ford 7610

Specifications & Review Ford 7610 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..

Ford 7610The Ford 7610 is a 2WD or 4WD utility tractor from the 10 series. This tractor was manufactured by Ford from 1982 to 1992. The Ford 7610 is equipped with a 4.4 L (268.0 cu·in) four-cylinder diesel engine and one of three transmissions: a dual-range tansmission with 8 forward and 2 reverse gears, a partial power shift transmission with 16 forward and 4 reverse gears or a synchromesh partial power shift transmission with 16 forward and 8 reverse gears.

The Ford 7610 utility tractor used the Ford engine. It is a 4.4 L, 4,392 cm2, (268.0 cu·in) four-cylinder turbocharged diesel engine with 112.0 mm (4.41 in) of the cylinder bore and 112.0 mm (4.41 in) of the piston stroke. The compression ratio rating is 15.6:1. This engine produced 98.3 PS (72.3 kW; 97.0 HP) at 2,100 rpm of output power and 377.0 N·m (38.4 kg·m, 277.8 ft·lb) of torque.

The Ford 7610 is equipped with power steering, differential mechanical wet disc brakes, two-post ROPS or Cab with air-conditioning (optional), and 130.6 liters (34.5 US gal.; 28.7 Imp. gal) fuel tank.

Following attachments are available for the Ford 7610 utility tractor:

  • Ford 777B loader
  • Ford 777D loader
  • Ford 777F loader

Ford 7610 Specifications

General Specifications
Model Ford 7610
Length 2WD: 3,680 mm (144.9 in)
4WD: 3,880 mm (152.8 in)
Width 1,950 mm (76.8 in)
Height ROPS: 2,430 mm (95.7 in)
Cab: 2,700 mm (106.3 in)
Wheel base 2WD: 2,220 mm (87.4 in)
4WD: 2,250 mm (88.6 in)
Ground clearance (front axle) 2WD: 460 mm (18.1 in)
4WD: 470 mm (18.5 in)
Weight 2,692 kg (5,935 lbs)
Fuel tank capacity 130.6 liters (34.5 US gal.; 28.7 Imp. gal)
Battery 12V, 128Ah
Cabin type Two-post ROPS or Cab with air-conditioning (optional)
Engine
Engine model Ford
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.4 L, 4,392 cm2, (268.0 cu·in)
Bore and stroke 112.0 mm X 112.0 mm (4.41 in X 4.41 in)
Compression ratio 15.6:1
Horsepower 98.3 PS (72.3 kW; 97.0 HP) at 2,100 rpm
Torque 377.0 N·m (38.4 kg·m, 277.8 ft·lb)
Starter Electric
Oil capacity: 8.5 L (9 US. qt, 7.5 Imp. qt.)
Coolant capacity: 17.0 L (18 US. qt, 15 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Differential mechanical wet disc
Transmission model Dual-range
Transmission type
Gears 8 forward and 2 reverse
Speed Forward: 30.0 kmh (18.6 mph) Reverse: 14.4 kmh (8.9 mph)
Transmission oil capacity 56.8 L (15 US. gal, 12.5 Imp. gal.)
Transmission model Dual Power
Transmission type Partial power shift
Gears 16 forward and 4 reverse
Speed Forward: 30.0 kmh (18.6 mph) Reverse: 14.4 kmh (8.9 mph)
Transmission model Dual Power
Transmission type Synchromesh partial power shift
Gears 16 forward and 8 reverse
Speed Forward: 30.6 kmh (19 mph) Reverse: 11.2 kmh (7 mph)
Tires
Front tires Ag: 7.50-16 (2WD), 11.2-24 (4WD)
Rear tires Ag: 16.9-30

Three-Point Hitch
Category II
Control type
Lift capacity (at 610 mm /24 in) 2,030 kg (4,480 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 56.8 L (15 US. gal, 12.5 Imp. gal.)
Pressure 2500 psi (172.4 bar)
Valves 1
Pump flow 18.2 gpm (68.9 lpm)
Steering flow 2.74 gpm (10.4 lpm)

Maybe that’s all the information about the Ford 7610 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment