Specifications & Review Honda H5013 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12 000 tractors and machines. If you choose sort items by model, year, power and factory..
The Honda H5013 is a small tractor with vertical general-purpose Honda GXV390 engine (389 cc, 23.7 cu-in) and selective sliding eight speeds forward and four speeds reverse transmission. The Honda H5013 small tractor was produced from 1991 to 1999.
The Honda GXV390 is air-cooled single-cylinder four-stroke gasoline engine with vertical PTO shaft. The GXV390 engine has an OHV design with two valves; sophisticated air intake system and multi-chamber exhaust system. An 88.0 mm (3.46 in) cylinder bore and 64.0 mm (2.5 in) piston stroke give the motor a total of 389 cc (23.7 cu-in) of displacement. Compression ratio rating is 7.7:1. The Honda GXV390 motor produces 13.0 HP (9.7 kW) at 3,600 rpm and 28.0 Nm (2.8 kg·m, 20.3 ft·lb) of torque at 2,500 rpm.
The Honda H5013 tractor used a mechanical leading-trailing shoe type brakes and pinion-and-sector four-wheel steering. The tactor has 150 mm (5.9 in.) of ground clearance. The Honda H5013 is avalible in two versions:
- A4 type – two and four-wheel drive;
- A2 type – two-wheel drive only
|
|
Honda H5013 specifications
| General Specifications | |
| Model | Honda H5013 |
| Length | 2,190 mm (86.2 in) |
| Width | 1,060 mm (41.7 in) |
| Height | 1,758 mm (870.3 in) |
| Wheel base | 1,305 mm (51.4 in.) |
| Dry weight (without tines) |
A4 type: 465.0 kg (1025.0 lbs) A2 type: 430.0 kg (948.0 lbs) |
| Wheel tread |
Front: 855 mm (33.7 in.) Rear: 850 mm (33.5 in.) |
| Groundclearance | 150 mm (5.9 in.) |
| Front tires size | 20×7.0-12 |
| Front tires pressure | 98 kPa (1.0 kg/cm2, 14 psi) |
| Rear tires size | 24.5×8-14 |
| Rear tires pressure | 78 kPa (0.8 kg/cm2, 11 psi) |
| Fuel tank capacity | 8.5 l (2.2 US gal.) |
|
|
| Engine | |
| Engine model | Honda GXV390 |
| Displacement | 389 cm3 (23.7 cu-in) |
| Bore x stroke | 88.0 X 64.0 mm (3.46 x 2.5 in) |
| Max. horsepower | 13.0 HP (9.7 kW) at 3600 rpm |
| Max. torque | 28.0 Nm (2.8 kg·m, 20.3 ft·lb) at 2,500 rpm |
| Carburetor | Horizontal type, butterfly valve |
| Cooling system | Forced-air |
| Ignition system | Transistorized magneto ignition |
| Lubricating system | Pressure and splash |
| Starting system | Electric starter |
| Stoping system | Ignition primary circuit ground |
| Fuel used | Unleaded gasoline (octane number 86 or higher) |
| Spark plug | NGK: BPR5ES NIPPONDENSO: W16EPR-U |
| Oil type | Honda 4-stroke or an equivalent (SF or SG) |
| Recommended oil | SAE 10W-30 |
| Oil capacity | 1.1 L (1.2 US gal, 1.0 lmp qt) |
|
|
| Transmission | |
| Gear type | Selective sliding 8 speeds forward and 4 speeds reverse transmission |
| Gear selections | 8 forward, 4 reverse |
| Groung speeds |
Forward: 1 (L-1): 0.7 km/h (0.4 mph) 2 (H-1): 1.1 km/h (0.7 mph) 3 (L-2): 1.5 km/h (0.9 mph) 4 (H-2): 2.3 km/h (1.4 mph) 5 (L-3): 3.2 km/h (2.0 mph) 6 (H-3): 5.1 km/h (3.2 mph) 7 (L-4): 6.8 km/h (4.2 mph) 8 (H-4): 10.7 km/h (6.6 mph) Reverse: |
| Frame | |
| Brakes | Mechanical leading-trailing shoe type brake (rear wheels) |
| Steering | Pinion-and-sector four-wheel steering |
| Hydraulic system | |
| Working pressure | 90 kg/cm2 (1,280 psi) |
| Pump type | Gear pump |
| Oil capacity |
1.8 L (1.9 US. qt) 1.95 L (2.1 US.qt) with rear hydraulic lift |
Maybe that’s all the information about the Honda H5013 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
