Ingersoll 4016

Specifications and Review tractor Ingersoll 4016 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Ingersoll 4016The Ingersoll 4016 is a 2WD garden tractor from the 4000 series. This tractor was manufactured by Ingersoll in Winneconne, Wisconsin, USA from 1989 to 2004.

The Ingersoll 4016 is equipped with one of two engines: a 0.7 L (43.3 cu·in) two-cylinder gasoline engine or a 0.5 L (29.3 cu·in) two-cylinder gasoline engine and a hydrostatic transmission with infinite forward and reverse (2-range) gears.

The tractor could be equipped with the following engines:

  • Onan P216. It is a 0.7 L, 709 cm2, (43.3 cu·in) two-cylinder natural aspirated gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke. The compression ratio rating is 6.5:1. This engine produced 16.2 PS (11.9 kW; 16.0 HP) at 3,600 rpm of output power.
  • Briggs & Stratton 303777. It is a 0.5 L, 480 cm2, (29.3 cu·in) two-cylinder natural aspirated gasoline engine. The cylinder bore is 68.0 mm (2.68 in) and the piston stroke is 66.0 mm (2.6 in). This engine produced 16.2 PS (11.9 kW; 16.0 HP) at 3,600 rpm of output power.

The Ingersoll 4016 is equipped with manual steering, an open operator station, and 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank.

Following attachments are available for the Ingersoll 4016 garden tractor:

  • Mid-mount Ingersoll RN44: 44 in (1,110 mm) mower deck with 2-blade
  • Mid-mount Ingersoll RM48: 48 in (1,210 mm) mower deck with 3-blade
  • Mid-mount Ingersoll RM60: 60 in (1,520 mm) mower deck with 3-blade
  • Front-mount Ingersoll UB54: 54 in (1,370 mm) blade
  • Front-mount Ingersoll SB48: 48 in (1,210 mm) blade

Ingersoll 4016 Specifications

General Specifications
Model Ingersoll 4016
Length 1,820 mm (71.7 in)
Width 1,040 mm (40.9 in)
Height (steering wheel) 1,100 mm (43.3 in)
Wheel base 1,210 mm (47.6 in)
Ground clearance (rear axle) 270 mm (10.6 in)
Weight 347 kg (765 lbs)
Fuel tank capacity 11.4 liters (3 US gal.; 2.5 Imp. gal)
Battery 12V, CCA 300A
Cabin type Open operator station
Engine
Engine model Onan P216
Engine type Four-stroke, air-cooled
Cylinders 2
Fuel type Gasoline
Displacement 0.7 L, 709 cm2, (43.3 cu·in)
Bore and stroke 83.0 mm X 73.0 mm (3.27 in X 2.87 in)
Compression ratio 6.5:1
Horsepower 16.2 PS (11.9 kW; 16.0 HP) at 3,600 rpm
Starter Electric
Spark plug Champion RS14YC
Engine
Engine model Briggs & Stratton 303777
Engine type Four-stroke, air-cooled
Cylinders 2
Fuel type Gasoline
Displacement 0.5 L, 480 cm2, (29.3 cu·in)
Bore and stroke 68.0 mm X 66.0 mm (2.68 in X 2.6 in)
Horsepower 16.2 PS (11.9 kW; 16.0 HP) at 3,600 rpm
Starter Electric
Spark plug Champion RC12YC

Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes
Transmission model Hy-drive
Transmission type Hydrostatic
Gears Infinite forward and reverse (2-range)
Tires
Front tires Ag: 16×6.50-8
Rear tires Ag: 32×8-16

Three-Point Hitch
Category 0 (optional)
Control type
Lift capacity (at ends)
Hydraulic system
Hydraulic type Open center
Pressure Transmission: 2100 psi (144.8 bar)
Lift: 575 psi (39.6 bar)
Valves 2
Pump flow 8.0 gpm (30.3 lpm)

Maybe that’s all the information about the Ingersoll 4016 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment