International Harvester 1486

Specifications and review tractor International Harvester 1486 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

International Harvester 1486The International Harvester 1486 is a 2WD or 4WD row-crop tractor from the 86 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA from 1976 to 1981. The IH 1486 is equipped with a 7.1 L (436.0 cu·in) six-cylinder diesel engine and a torque amplifier transmission with 16 forward and 8 reverse gears.

The International Harvester 1486 row-crop tractor used the International Harvester DT436 engine. It is a 7.1 L, 7,145 cm2, (436.0 cu·in) six-cylinder turbocharged diesel engine with 109.0 mm (4.29 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 147 PS (108.1 kW; 145.0 HP) at 2,600 rpm of PTO output power.

The International Harvester 1486 is equipped with power assist steering, hydraulic disc brakes, the cab and 238.5 liters (63 US gal.; 52.5 Imp. gal) fuel tank.

International Harvester 1486 Specifications

General Specifications
Model International Harvester 1486
Length 2WD: 4,260 mm (167.7 in)
4WD: 4,240 mm (167.0 in)
Width 2,590 mm (102 in)
Height (Cab) 2,920 mm (115 in)
Wheel base Wide-tread front: 2,660 mm (104.7 in)
Tricycle front: 2,560 mm (101.0 in)
4WD: 2,510 mm (99.0 in)
Ground clearance 350 mm (13.8 in)
Weight (operating) 6,200 kg (13,669 lbs)
Fuel tank capacity 238.5 liters (63 US gal.; 52.5 Imp. gal)
Battery Two 12V, CCA 470A
Cabin type Cab (standard)
Engine model International Harvester DT436
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.1 L, 7,145 cm2, (436.0 cu·in)
Bore and stroke 109.0 mm X 127.0 mm (4.29 in X 5 in)
Horsepower 147 PS (108.1 kW; 145 HP) at 2,600 rpm
Starter Electric
Oil capacity: 18.9 L (20 US. qt, 16.6 Imp. qt.)
Coolant capacity: 25.6 L (27.1 US. qt, 22.5 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power assist
Brakes Hydraulic disc
Transmission model
Transmission type Torque Amplifier
Gears 16 forward and 8 reverse
Speed Forward: 35.7 kmh (22.2 mph) Reverse: 17.5 (10.9 mph)
Transmission oil capacity 102.2 L (27 US. gal, 22.5 Imp. gal.)
Front tires Ag: 11.00-16 (2WD), 13.6-24 (4WD)
Rear tires Ag: 18.4-38

Three-Point Hitch
Caterogy III/II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 85.2 L (90.03 US. qt, 74.97 Imp. qt.)
Valves 2
Pump flow 45.4 gpm (171.9 lpm)

Maybe that’s all the information about the International Harvester 1486 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment