Specifications and review tractor International Harvester 284 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The International Harvester 284 is a 2WD or 4WD compact utility tractor manufactured by Komatsu in Japan for distributor International Harvester from 1976 to 1984.
The International Harvester 284 is equipped with one of two engines: a 1.2 L (71.3 cu·in) four-cylinder gasoline engine or a 1.6 L (99.0 cu·in) four-cylinder diesel engine and sliding gear transmission with 8 forward and 2 reverse gears and with dry disc clutch.
The tractor could be equipped with the following engines:
- Mazda M4-71G. It is a 1.2 L, 1,168 cm2, (71.3 cu·in) four-cylinder natural aspirated gasoline engine with 70.0 mm (2.76 in) of the cylinder bore and 76.0 mm (2.99 in) of the piston stroke. The compression ratio rating is 8.6:1. This engine produced 28.4 PS (20.9 kW; 28.0 HP) at 2,600 rpm of output power.
- Nissan. It is a 1.6 L, 1,622 cm2, (99.0 cu·in) four-cylinder natural aspirated diesel engine. The cylinder bore is 83.0 mm (3.27 in) and the piston stroke is 100.0 mm (3.94 in). This engine produced 30.5 PS (22.4 kW; 30.0 HP) at 2,600 rpm of output power.
The IH 284 is equipped with manual steering, hydraulic wet disc brakes, open operator station, or two-post ROPS with canopy (optional), and 33.0 liters (8.7 US gal.; 7.3 Imp. gal) fuel tank.
|
International Harvester 284 Specifications
General Specifications | |
Model | International Harvester 284 |
Length | – |
Width | 1,400 mm (55.1 in) |
Height | 1,830 mm (72 in) |
Wheel base | 1,740 mm (68.5 in) |
Ground clearance | 350 mm (13.8 in) |
Weight | 1,100 kg (2,425 lbs) |
Fuel tank capacity | 33.0 liters (8.7 US gal.; 7.3 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station or two-post ROPS with canopy (optional) |
Engine | |
Engine model | Mazda M4-71G |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Gasoline |
Displacement | 1.2 L, 1,168 cm2, (71.3 cu·in) |
Bore and stroke | 70.0 mm X 76.0 mm (2.76 in X 2.99 in) |
Compression ratio | 8.6:1 |
Horsepower | 28.4 PS (20.9 kW; 28.0 HP) at 2,600 rpm |
Torque | 78.6 N·m (8 kg·m, 57.9 ft·lb) at 2,200 rpm |
Starter | Electric |
Oil capacity: | 3.0 L (3.2 US. qt, 2.6 Imp. qt.) |
Coolant capacity: | 4.9 L (5.2 US. qt, 4.3 Imp. qt.) |
Engine | |
Engine model | Nissan |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 1.6 L, 1,622 cm2, (99.0 cu·in) |
Bore and stroke | 83.0 mm X 100.0 mm (3.27 in X 3.94 in) |
Horsepower | 30.5 PS (22.4 kW; 30.0 HP) at 2,600 rpm |
Torque | 78.6 N·m (8 kg·m, 57.9 ft·lb) at 1,600 rpm |
Starter | Electric |
Oil capacity: | 4.9 L (5.2 US. qt, 4.3 Imp. qt.) |
Coolant capacity: | 6.8 L (7.2 US. qt, 6 Imp. qt.) |
|
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Manual |
Brakes | Hydraulic wet disc |
Transmission model | – |
Transmission type | Sliding gear with dry disc clutch |
Gears | 8 forward and 2 reverse |
Speed | Forward: 14.9 kmh (9.3 mph) Reverse: 10.0 (6.2 mph) |
Transmission oil capacity | 12.9 L (3.4 US. gal, 2.8 Imp. gal.) |
Tires | |
Front tires | Ag: 5.00-15 (2WD), 7.00-16 (4WD) |
Rear tires | Ag: 11.2-24 |
|
Three-Point Hitch | |
Caterogy | I |
Control type | Position control |
Lift capacity (at ends) | 910 kg (2,010 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Transmission |
Rear PTO speed | 540/1,000 rpm |
Hydraulic system | |
Hydraulic type | – |
Pressure | 1920 psi (132.4 bar) |
Total flow | 6.0 gpm (22.7 lpm) |
Maybe that’s all the information about the International Harvester 284 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you