International Harvester 3288

Specifications and review tractor International Harvester 3288 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

International Harvester 3288The International Harvester 3288 is a 2WD/4WD row-crop tractor from the 30 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA from 1981 to 1985. The IH 3288 is equipped with a 5.9 L (358.0 cu·in) six-cylinder diesel engine and a partial power shift with cerametallic disc clutch transmission with 16 forward and 8 reverse gears.

The International 3288 row-crop tractor used the International Harvester D358 engine. It is a 5.9 L, 5,867 cm2, (358.0 cu·in) six-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 129.0 mm (5.08 in) of the piston stroke. The compression ratio rating is 14.8:1. This engine produced 91.3 PS (67.1 kW; 90.0 HP) at 2,400 rpm of PTO output power.

The IH 3288 is equipped with power steering, hydraulic wet disc brakes, Cab (standard) and 189.3 liters (50 US gal.; 41.6 Imp. gal) fuel tank.


International Harvester 3288 Specifications

General Specifications
Model International Harvester 3288
Length 4,670 mm (183.9 in)
Width 2,590 mm (102 in)
Height (cab) 2,840 mm (111.8 in)
Wheel base 2,660 mm (104.7 in)
Ground clearance 330 mm (13 in)
Weight (operating) 5,334 kg (11,759 lbs)
Fuel tank capacity 189.3 liters (50 US gal.; 41.6 Imp. gal)
Battery 12V
Cabin type Cab (standard)
Engine
Engine model International Harvester D358
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.9 L, 5,867 cm2, (358.0 cu·in)
Bore and stroke 98.0 mm X 129.0 mm (3.86 in X 5.08 in)
Compression ratio 14.8:1
Horsepower 91.3 PS (67.1 kW; 90.0 HP) at 2,400 rpm
Starter Electric
Oil capacity: 10.4 L (11 US. qt, 9.2 Imp. qt.)
Coolant capacity: 22.7 L (24 US. qt, 20 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Brakes Hydraulic wet disc
Transmission model
Transmission type Partial power shift with cerametallic disc clutch
Gears 16 forward and 8 reverse
Speed Forward: 30.7 kmh (19.1 mph) Reverse: 15.1 kmh (9.4 mph)
Transmission oil capacity 85.2 L (22.5 US. gal, 18.7 Imp. gal.)
Tires
Front tires Ag: 9.5L-15
Rear tires Ag: 18.4-34

Three-Point Hitch
Category II
Control type Draft sensing
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 85.2 L (22.5 US. gal, 18.7 Imp. gal.)
Valves 2 or 3
Pump flow 15.0 gpm (56.8 lpm)
Steering flow 12.0 gpm (45.4 lpm)
Total flow 27.0 gpm (102.2 lpm)

Maybe that’s all the information about the International Harvester 3288 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment