International Harvester 384

Specifications and review tractor International Harvester 384 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

International Harvester 384The International Harvester 384 is a 2WD utility tractor manufactured by International Harvester in Bradford, England from 1977 to 1982. The International 384 is equipped with a 2.5 L (154.0 cu·in) four-cylinder diesel engine and a unsynchronized gear transmission with 8 forward and 2 reverse gears.

The IH 384 utility tractor used the International Harvester BD-154 engine. It is a 2.5 L, 2,523 cm2, (154.0 cu·in) four-cylinder natural aspirated diesel engine with 89.0 mm (3.5 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. This engine produced 36.4 PS (26.8 kW; 36.0 HP) at 2,100 rpm of output power.

International Harvester 384 Specifications

General Specifications
Model International 384
Length 3,320 mm (130.7 in)
Width 1,690 mm (66.5 in)
Height 1,490 mm (58.7 in)
Wheel base 1,940 mm (76.4 in)
Ground clearance 460 mm (18.1 in)
Weight 1,920 kg (4,233 lbs)
Fuel tank capacity 45.4 liters (12 US gal.; 10 Imp. gal)
Battery 12V, CCA: 605A
Cabin type Open operator station
Engine model International Harvester BD-154
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.5 L, 2,523 cm2, (154.0 cu·in)
Bore and stroke 89.0 mm X 102.0 mm (3.5 in X 4.02 in)
Horsepower 36.4 PS (26.8 kW; 36.0 HP) at 2,100 rpm
Starter Electric
Oil capacity: 7.6 L (8 US. qt, 6.7 Imp. qt.)
Coolant capacity: 10.2 L (10.8 US. qt, 9 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type
Transmission model
Transmission type Unsynchronized gear
Gears 8 forward and 2 reverse
Speed Forward: 26.3 kmh (16.3 mph) Reverse: 11.0 (6.8 mph)
Transmission oil capacity 35.3 L (9.3 US. gal, 7.8 Imp. gal.)
Front tires Ag: 6.00-16
Rear tires Ag: 13.6-28

Three-Point Hitch
Caterogy I
Control type
Lift capacity (at ends) 1,180 kg (2,600 lbs)
PTO (Power take-off shaft)
Rear PTO type
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Pump flow 7.8 gpm (29.5 lpm)

Maybe that’s all the information about the International Harvester 384 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment