International Harvester 4586

Specifications and review tractor International Harvester 4586 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

International Harvester 4586The International Harvester 4586 is a 4WD four-wheel drive tractor manufactured by Steiger in Fargo, North Dakota, USA for distributor International Harvester from 1976 to 1981. The International Harvester 4586 is equipped with a 13.1 L (798.0 cu·in) eight-cylinder diesel engine and a transmission with 10 forward and 2 reverse gears.

The International 4586 tractor used the International Harvester DV-800 engine. It is a 13.1 L, 13,077 cm2, (798.0 cu·in) eight-cylinder turbocharged diesel engine with 135.0 mm (5.31 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 15.6:1. This engine produced 304.2 PS (223.7 kW; 300.0 HP) at 2,600 rpm of output power and 983.1 N·m (100.2 kg·m, 724.5 ft·lb) at 1,800 rpm of torque.

The IH 4586 is equipped with hydrostatic power steering, hydraulic wet disc brakes, cab with air-conditioning, and 643.5 liters (170 US gal.; 141.6 Imp. gal) fuel tank.

International Harvester 4586 Specifications

General Specifications
Model International Harvester 4586
Wheel base 2,990 mm (117.7 in)
Ground clearance
Weight (operating) 11,680 kg (25,750 lbs)
Fuel tank capacity 643.5 liters (170 US gal.; 141.6 Imp. gal)
Battery 12V
Cabin type Cab with air-conditioning
Engine model International Harvester DV-800
Engine type Four-stroke, liquid-cooled, V
Cylinders 8
Fuel type Diesel
Displacement 13.1 L, 13,077 cm2, (798.0 cu·in)
Bore and stroke 135.0 mm X 114.0 mm (5.31 in X 4.49 in)
Compression ratio 15.6:1
Horsepower 304.2 PS (223.7 kW; 300.0 HP) at 2,600 rpm
Torque 983.1 N·m (100.2 kg·m, 724.5 ft·lb) at 1,800 rpm
Starter Electric

Transmission and chassis
Chassis 4×4 articulated 4WD
Steering type Hydrostatic power
Brakes Hydraulic wet disc
Transmission model
Transmission type
Gears 10 forward and 2 reverse
Speed Forward: 36.7 kmh (22.8 mph) Reverse: 5.3 (3.3 mph)
Front tires Ag: 24.5-32
Rear tires Ag: 24.5-32

Three-Point Hitch
Category IV
Control type
Lift capacity (at ends)
Hydraulic system
Hydraulic type
Pump flow 19.0 gpm (71.9 lpm)

Maybe that’s all the information about the International Harvester 4586 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment