International Harvester 5088

Specifications and review tractor International Harvester 5088 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

International Harvester 5088The International Harvester 5088 is a 2WD or 4WD row-crop tractor from the 50 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA from 1981 to 1985. The International 5088 is equipped with a 7.1 L (436.0 cu·in) six-cylinder diesel engine and a partial power shift transmission with 18 forward and 6 reverse gears.

The IH 5088 row-crop tractor used the International Harvester DT-436B engine. It is a 7.1 L, 7,145 cm2, (436.0 cu·in) six-cylinder turbocharged diesel engine with 109.0 mm (4.29 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 137 PS (100.7 kW; 135 HP) at 2,400 rpm of PTO output power.

The International Harvester 5088 is equipped with hydrostatic power steering, wet disc type brakes, cab with heat and A/C, and 265.0 liters (70 US gal.; 58.3 Imp. gal) fuel tank.

International Harvester 5088 Specifications

General Specifications
Model International Harvester 5088
Length 4,990 mm (196.5 in)
Width 2,840 mm (111.8 in)
Height 2,920 mm (115 in)
Wheel base 2,830 mm (111.4 in)
Ground clearance 430 mm (16.9 in)
Weight (operating) 7,260 kg (16,006 lbs)
Fuel tank capacity 265.0 liters (70 US gal.; 58.3 Imp. gal)
Battery 12V
Cabin type Cab with heat and A/C
Engine model International Harvester DT-436B
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.1 L, 7,145 cm2, (436.0 cu·in)
Bore and stroke 109.0 mm X 127.0 mm (4.29 in X 5 in)
Horsepower 137 PS (100.7 kW; 135.0 HP) at 2,400 rpm
Starter Electric
Oil capacity: 18.9 L (20 US. qt, 16.6 Imp. qt.)
Coolant capacity: 27.4 L (29 US. qt, 24.1 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc type
Transmission model Synchro Tri-Six (STS)
Transmission type Partial power shift
Gears 18 forward and 6 reverse
Speed Forward: 28.6 kmh (17.8 mph) Reverse: 9.7 (6 mph)
Transmission oil capacity 164.7 L (43.5 US. gal, 36.2 Imp. gal.)
Front tires Ag: 10.00-16
Rear tires Ag: 18.4-38

Three-Point Hitch
Category III
Control type
Lift capacity (at ends) 3,170 kg (6,990 lbs)
Optional: 3,755 kg (8,280 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Closed center
Hydraulic capacity 164.6 L (43.5 US. gal, 36.2 Imp. gal.)
Valves 2
Pump flow 25.0 gpm (94.6 lpm)
Optional: 40.0 gpm (151.4 lpm)
Steering flow 12.0 gpm (45.4 lpm)
Total flow 67.0 gpm (253.6 lpm)
Optional: 82.0 gpm (310.4 lpm)

Maybe that’s all the information about the International Harvester 5088 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment