International Harvester 5288

Specifications and review tractor International Harvester 5288 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

International Harvester 5288The International Harvester 5288 is a 2WD or 4WD row-crop tractor from the 50 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA from 1981 to 1985. The International Harvester 5288 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and a partial power shift transmission with 18 forward and 6 reverse gears.

The IH 5288 row-crop tractor used the International Harvester DT-466B engine. It is a 7.6 L, 7,636 cm2, (466.0 cu·in) six-cylinder turbocharged diesel engine with 109.0 mm (4.29 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. This engine produced 162.2 PS (119.3 kW; 160.0 HP) at 2,400 rpm of PTO output power.

The International 5288 is equipped with hydrostatic power steering, wet disc brakes, cab standard with heat and A/C, and 329.3 liters (87 US gal.; 72.4 Imp. gal) fuel tank.


International Harvester 5288 Specifications

General Specifications
Model International Harvester 5288
Length 4,990 mm (196.5 in)
Width 2,840 mm (111.8 in)
Height 2,940 mm (115.7 in)
Wheel base 2,830 mm (111.4 in)
Ground clearance 460 mm (18.1 in)
Weight (operating) 7,740 kg (17,064 lbs)
Fuel tank capacity 329.3 liters (87 US gal.; 72.4 Imp. gal)
Battery 12V
Cabin type Cab standard with heat and A/C
Engine
Engine model International Harvester DT-466B
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.6 L, 7,636 cm2, (466.0 cu·in)
Bore and stroke 109.0 mm X 136.0 mm (4.29 in X 5.35 in)
Horsepower 162.2 PS (119.3 kW; 160.0 HP) at 2,400 rpm
Starter Electric
Oil capacity: 18.9 L (20 US. qt, 16.6 Imp. qt.)
Coolant capacity: 31.2 L (33 US. qt, 27.5 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc
Transmission model Synchro Tri-Six (STS)
Transmission type Partial power shift
Gears 18 forward and 6 reverse
Speed Forward: 29.6 kmh (18.4 mph) Reverse: 9.8 (6.1 mph)
Transmission oil capacity 164.7 L (43.5 US. gal, 36.2 Imp. gal.)
Tires
Front tires Ag: 14L-16.1
Rear tires Ag: 20.8-38

Three-Point Hitch
Category III
Control type
Lift capacity (at ends) 3,663 kg (8,075 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type Closed center
Hydraulic capacity 164.6 L (43.5 US. gal, 36.2 Imp. gal.)
Valves 2
Pump flow 25.0 gpm (94.6 lpm)
Optional: 40.0 gpm (151.4 lpm)
Steering flow 12.0 gpm (45.4 lpm)
Total flow 67.0 gpm (253.6 lpm)
Optional: 82.0 gpm (310.4 lpm)

Maybe that’s all the information about the International Harvester 5288 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment