International Harvester 756

Specifications and review tractor International Harvester 756 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

International Harvester 756The International Harvester 756 is a 2WD or 4WD utility tractor manufactured by International Harvester in Rock Island, Illinois, USA (ended in 1971) or Geelong, Australia from 1967 to 1983.

The International Harvester 756 is equipped with one of two engines: a 4.8 L (291.0 cu·in) six-cylinder gasoline engine or a 5.1 L (310.0 cu·in) six-cylinder diesel engine and a transmission with 8 forward and 4 reverse gears.

The tractor could be equipped with the following engines:

  • International Harvester C291. It is a 4.8 L, 4,768 cm2, (291.0 cu·in) six-cylinder natural aspirated gasoline engine with 95.0 mm (3.74 in) of the cylinder bore and 112.0 mm (4.41 in) of the piston stroke.
  • Interntional Harvester D310. It is a 5.1 L, 5,080 cm2, (310.0 cu·in) six-cylinder natural aspirated diesel engine. The cylinder bore is 98.0 mm (3.86 in) and the piston stroke is 111.0 mm (4.37 in).

International Harvester 756 Specifications

General Specifications
Model International Harvester 756
Wheel base 2,560 mm (100.8 in)
Weight 3,800 kg (8,378 lbs)
Fuel tank capacity 125.0 liters (33 US gal.; 27.5 Imp. gal)
Cabin type Open operator station
Engine model International Harvester C291
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Gasoline
Displacement 4.8 L, 4,768 cm2, (291.0 cu·in)
Bore and stroke 95.0 mm X 112.0 mm (3.74 in X 4.41 in)
Starter Electric
Engine model Interntional Harvester D310
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.1 L, 5,080 cm2, (310.0 cu·in)
Bore and stroke 98.0 mm X 111.0 mm (3.86 in X 4.37 in)
Horsepower 0 PS ( kW; 0 HP) at rpm
Starter Electric

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type
Transmission model
Transmission type
Gears 8 forward and 4 reverse
Front tires Ag: 9.5L-15
Rear tires Ag: 18.4-34

Three-Point Hitch
Category II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Open center
Pump flow 12.0 gpm (45.4 lpm)

Maybe that’s all the information about the International Harvester 756 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment