Specifications and review tractor International Harvester 766 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The International Harvester 766 is a 2WD row-crop tractor from the 66 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA from 1971 to 1976.
The International Harvester 766 is equipped with one of two engines: a 6.4 L (391.0 cu·in) six-cylinder gasoline engine or a 5.9 L (359.9 cu·in) six-cylinder gasoline engine and one of two transmissions: a sliding gear transmission with 8 forward and 4 reverse gears and dry disc clutch or a partial power shift transmission with 16 forward and 8 reverse gears and dry disc clutch.
The tractor could be equipped with the following engines:
International Harvester C291. It is a 6.4 L, 6,407 cm2, (391.0 cu·in) six-cylinder natural aspirated gasoline engine with 95.0 mm (3.74 in) of the cylinder bore and 112.0 mm (4.41 in) of the piston stroke.
International Harvester D360. It is a 5.9 L, 5,898 cm2, (359.9 cu·in) six-cylinder natural aspirated gasoline engine. The cylinder bore is 98.0 mm (3.86 in) and the piston stroke is 129.0 mm (5.08 in). The compression ratio rating is 17.0:1.
The International Harvester 766 is equipped with hydrostatic power steering, hydraulic dry disc brakes, Open operator station or Cab (optional) and 140.0 liters (37 US gal, 30.8 Imp. gal) fuel tank.
International Harvester 766 Specifications
General Specifications
Model
International Harvester 766
Length
–
Width
–
Height
–
Wheel base
2,600 mm (102.4 in)
Weight (operating)
4,670 kg (10,296 lbs)
Fuel tank capacity
140.0 liters (37 US gal, 30.8 Imp. gal)
Battery
–
Cabin type
Open operator station or Cab (optional)
Engine
Engine model
International Harvester C291
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
6
Fuel type
Gasoline
Displacement
6.4 L, 6,407 cm2, (391.0 cu·in)
Bore and stroke
95.0 mm X 112.0 mm (3.74 in X 4.41 in)
Horsepower
–
Starter
Electric
Engine
Engine model
International Harvester D360
Engine type
Four-stroke, air-cooled, inline
Cylinders
6
Fuel type
Gasoline
Displacement
5.9 L, 5,898 cm2, (359.9 cu·in)
Bore and stroke
98.0 mm X 129.0 mm (3.86 in X 5.08 in)
Compression ratio
17.0:1
Horsepower
–
Starter
Electric
Transmission and chassis
Chassis
4×2 2WD
Steering type
Hydrostatic power
Brakes
Hydraulic dry disc
Transmission model
–
Transmission type
Sliding gear with dry disc clutch
Gears
8 forward and 4 reverse
Transmission model
Torque Amplifier
Transmission type
Partial power shift with dry disc clutch
Gears
16 forward and 8 reverse
Tires
Front tires
Ag: 9.5L-15
Rear tires
Ag: 18.4-34
Three-Point Hitch
Category
II
Control type
–
Lift capacity (at ends)
–
PTO (Power take-off shaft)
Rear PTO type
Independent
Rear PTO speed
540, 1000 rpm
Hydraulic system
Hydraulic type
Open center
Pump flow
12.0 gpm (45.4 lpm)
Maybe that’s all the information about the International Harvester 766 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The International Harvester 766 is a 2WD row-crop tractor from the 66 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA from 1971 to 1976. 
