International Harvester 856

Specifications and review tractor International Harvester 856 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

International Harvester 856The International Harvester 856 is a 2WD utility tractor manufactured by International Harvester from 1967 to 1971.

The International Harvester 856 is equipped with one of two engines: a 6.7 L (407.0 cu·in) six-cylinder diesel engine or a 4.9 L (301.0 cu·in) six-cylinder gasoline/LP-gas engine and sliding gear transmission with 8 forward and 4 reverse gears.

The tractor could be equipped with the following engines:

  • International Harvester D-407. It is a 6.7 L, 6,670 cm2, (407.0 cu·in) six-cylinder natural aspirated diesel engine with 110.0 mm (4.33 in) of the cylinder bore and 117.0 mm (4.61 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 96.3 PS (70.8 kW; 95.0 HP) at 2,400 rpm of PTO output power.
  • International Harvester C-301. It is a 4.9 L, 4,932 cm2, (301.0 cu·in) six-cylinder natural aspirated gasoline/LP-gas engine. The cylinder bore is 97.0 mm (3.82 in) and the piston stroke is 112.0 mm (4.41 in). The compression ratio rating is 7.7:1 for gasoline version or 8.8:1 for LP-gas version. This engine produced 96.3 PS (70.8 kW; 95.0 HP) at 2,400 rpm of PTO output power.

The IH 856 is equipped with power steering, differential hydraulic dry disc brakes, an open operator station, and 159.0 liters (42 US gal.; 35 Imp. gal) fuel tank.


International Harvester 856 Specifications

General Specifications
Model International Harvester 856
Length
Width
Height
Wheel base
Weight (operating) Diesel: 4,665 kg (10,285 lbs)
Fuel tank capacity 159.0 liters (42 US gal.; 35 Imp. gal)
Battery Two 6V
Cabin type Open operator station
Engine
Engine model International Harvester D-407
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 6.7 L, 6,670 cm2, (407.0 cu·in)
Bore and stroke 110.0 mm X 117.0 mm (4.33 in X 4.61 in)
Compression ratio 17.0:1
Horsepower 96.3 PS (70.8 kW; 95.0 HP) at 2,400 rpm
Starter Electric
Coolant capacity: 22.7 L (24 US. qt, 20 Imp. qt.)
Engine
Engine model International Harvester C-301
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Gasoline/LP-gas
Displacement 4.9 L, 4,932 cm2, (301.0 cu·in)
Bore and stroke 97.0 mm X 112.0 mm (3.82 in X 4.41 in)
Compression ratio 7.7:1/8.8:
Horsepower 96.3 PS (70.8 kW; 95.0 HP) at 2,400 rpm
Starter Electric
Oil capacity: 8.5 L (9 US. qt, 7.5 Imp. qt.)
Coolant capacity: Gasoline: 19.9 L (21 US. qt, 17.5 Imp. qt.)
LP-gas: 20.3 L (21.45 US.qt, 17.86 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Differential hydraulic dry disc
Transmission model
Transmission type Sliding gear
Gears 8 forward and 4 reverse
Tires
Front tires Ag: 11L-15
Rear tires Ag: 18.4-38

Three-Point Hitch
Category II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type
Pump flow 12.0 gpm (45.4 lpm)

Maybe that’s all the information about the International Harvester 856 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment