J.I. Case 1070

Specifications and review tractor J.I. Case 1070 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

J.I. Case 1070The J.I. Case 1070 is a 2WD row-crop tractor from the 70 series. This tractor was manufactured by J.I. Case in Racine, Wisconsin, USA from 1970 to 1978. The J.I. Case 1070 is equipped with a 7.4 L (451.0 cu·in) six-cylinder diesel engine and one of two transmissions: a unsynchronized gear type transmission with 8 forward and 2 reverse gears and with dry disc clutch or a partial power shift transmission with 12 forward and 4 reverse gears with with hydraulic wet discs clutch.

The Case 1070 row-crop tractor used the J.I. Case engine. It is a 7.4 L, 7,391 cm2, (451.0 cu·in) six-cylinder natural aspirated diesel engine with 111.0 mm (4.37 in) of the cylinder bore and 127.0 mm (5.0 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 102.4 PS (75.3 kW; 101.0 HP) of output power.

The J.I. Case 1070 is equipped with power steering, differential hydraulic dry disc brakes, cab optional, and 189.3 liters (50 US gal.; 41.6 Imp. gal) fuel tank.


J.I. Case 1070 Specifications

General Specifications
Model J.I. Case 1070
Length 4,110 mm (161.8 in)
Width
Height (hood) 1,980 mm (78 in)
Wheel base Wide-front: 2,740 mm (107.9 in)
Tricycle: 2,560 mm (100.8 in)
Ground clearance 380 mm (15 in)
Weight (operating) 4,675 kg (10,307 lbs)
Fuel tank capacity 189.3 liters (50 US gal.; 41.6 Imp. gal)
Battery
Cabin type Cab optional
Engine
Engine model J.I. Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.4 L, 7,391 cm2, (451.0 cu·in)
Bore and stroke 111.0 mm X 127.0 mm (4.37 in X 5 in)
Compression ratio 16.5:1
Horsepower 102.4 PS (75.3 kW; 101.0 HP)
Starter Electric
Coolant capacity: 37.9 L (40 US. qt, 33.3 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Brakes Differential hydraulic dry disc
Transmission model
Transmission type Unsynchronized gear with dry disc clutch
Gears 8 forward and 2 reverse
Speed Forward: 24.1 kmh (15 mph) Reverse: 12.2 (7.6 mph)
Transmission model Range Power Shift
Transmission type Partial power shift with hydraulic wet discs clutch
Gears 12 forward and 4 reverse
Speed Forward: 27.4 kmh (17 mph) Reverse: 27.4 (17 mph)
Tires
Front tires Ag: 10.00-16
Rear tires Ag: 18.4-34

Three-Point Hitch
Category II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000, 540/1000 rpm
Hydraulic system
Hydraulic type
Valves 2
Pump flow 16.0 gpm (60.6 lpm)

Maybe that’s all the information about the J.I. Case 1070 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment