J.I. Case 1190

Specifications and review tractor J.I. Case 1190 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

J.I. Case 1190The J.I. Case 1190 is a 2WD utility tractor from the 90 series. This tractor was manufactured by J.I. Case in Meltham Mills, Huddersfield, England from 1980 to 1983. The J.I. Case 1190 is equipped with a 2.7 L (164.0 cu·in) three-cylinder diesel engine and a synchromesh transmission with 12 forward and 4 reverse gears and dry disc clutch.

The J.I. Case 1190 utility tractor used the J.I. Case engine. It is a 2.7 L, 2,687 cm2, (164.0 cu·in) three-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 43.7 PS (32.1 kW; 43.0 HP) at 2,200 rpm of PTO output power.

The J.I. Case 1190 is equipped with hydrostatic power steering, mechanical drum brakes, two-post ROPS, and 60.6 liters (16 US gal.; 13.3 Imp. gal) fuel tank.

J.I. Case 1190 Specifications

General Specifications
Model J.I. Case 1190
Length 3,070 mm (120.9 in)
Height (exhaust) 2,130 mm (83.9 in)
Wheel base 1,950 mm (76.8 in)
Ground clearance (front axle) 400 mm (15.7 in)
Weight (shipping) 2,095 kg (4,619 lbs)
Fuel tank capacity 60.6 liters (16 US gal.; 13.3 Imp. gal)
Battery 12V, 26Ah
Cabin type Two-post ROPS
Engine model J.I. Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.7 L, 2,687 cm2, (164.0 cu·in)
Bore and stroke 100.0 mm X 114.0 mm (3.94 in X 4.49 in)
Compression ratio 17.0:1
Horsepower 43.7 PS (32.1 kW; 43.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 6.2 L (6.6 US. qt, 5.5 Imp. qt.)
Coolant capacity: 8.5 L (9 US. qt, 7.5 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type Hydrostatic power
Brakes Mechanical drum
Transmission model
Transmission type Synchromesh with dry disc clutch
Gears 12 forward and 4 reverse
Speed Forward: 25.9 kmh (16.1 mph) Reverse: 14.9 (9.3 mph)
Front tires Ag: 6.00×16
Rear tires Ag: 13.6×28

Three-Point Hitch
Category I
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Transmission
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 27.3 L (7.2 US. gal, 6 Imp. gal.)
Valves 1 or 2
Pump flow 7.25 gpm (27.4 lpm)

Maybe that’s all the information about the J.I. Case 1190 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment