J.I. Case 1370

Specifications and review tractor J.I. Case 1370 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

J.I. Case 1370The J.I. Case 1370 is a 2WD row-crop tractor manufactured by J.I. Case in Racine, Wisconsin, USA from 1971 to 1978. The J.I. Case 1370 is equipped with a 8.3 L (504.0 cu·in) six-cylinder diesel engine and a partial power shift transmission with 12 forward and 3 reverse gears.

The J.I. Case 1370 row-crop tractor used the J.I. Case 504BDT engine. It is a 8.3 L, 8,259 cm2, (504.0 cu·in) six-cylinder turbocharged diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 143.1 PS (105.2 kW; 141.0 HP) at 2,200 rpm or 2,100 rpm (for versions before 1973) of output power.

The J.I. Case 1370 is equipped with hydrostatic power steering, differential hydraulic wet discs brakes, cab standard or four-post ROPS and open-station (available), and 302.8 liters (80 US gal.; 66.6 Imp. gal) fuel tank.

J.I. Case 1370 Specifications

General Specifications
Model J.I. Case 1370
Length 4,620 mm (181.9 in)
Width 2,430 mm (95.7 in)
Height ROPS: 2,690 mm (105.9 in)
Cab: 2,940 mm (115.7 in)
Wheel base 2,660 mm (104.7 in)
Ground clearance 400 mm (15.7 in)
Weight ROPS: 5,300 kg (11,684 lbs)
Cab: 5,975 kg (13,173 lbs)
Fuel tank capacity 302.8 liters (80 US gal.; 66.6 Imp. gal)
Battery Two 12V, CCA 300A, Group 30H
Cabin type Cab standard or Four-post ROPS and open-station (available)
Engine model J.I. Case 504BDT
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.3 L, 8,259 cm2, (504.0 cu·in)
Bore and stroke 117.0 mm X 127.0 mm (4.61 in X 5 in)
Compression ratio 16.5:1
Horsepower 143.1 PS (105.2 kW; 141.0 HP) at 2,200 or 2 rpm
Starter Electric
Oil capacity: 14.1 L (14.9 US. qt, 12.4 Imp. qt.)
Coolant capacity: 39.7 L (42 US. qt, 34.9 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type Hydrostatic power
Brakes Differential hydraulic wet discs
Differential lock Hydraulic
Transmission model
Transmission type Partial power shift
Gears 12 forward and 3 reverse
Speed Forward: 28.6 kmh (17.8 mph) Reverse: 13.5 (8.4 mph)
Front tires Ag: 10.00-16
Rear tires Ag: 18.4-38

Three-Point Hitch
Category III/II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type Variable flow (optional)
Hydraulic capacity 130.6 L (34.5 US. gal, 28.7 Imp. gal.)
Pressure 2050 psi (141.3 bar)
Valves 2
Pump flow 20.0 gpm (75.7 lpm)
Steering flow 8.0 gpm (30.3 lpm)
Total flow 28.0 gpm (106.0 lpm)
48.0 gpm (181.7 lpm) – optional

Maybe that’s all the information about the J.I. Case 1370 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment