J.I. Case 1390

Specifications and review tractor J.I. Case 1390 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

J.I. Case 1390The J.I. Case 1390 is a 2WD or 4WD utility tractor from the 90 series. This tractor was manufactured by J.I. Case in Meltham Mills, Huddersfield, England from 1980 to 1983. The J.I. Case 1390 is equipped with a 3.6 L (219.0 cu·in) four-cylinder diesel engine and a synchromesh transmission with 12 forward and 4 reverse gears and hydraulic dry disc clutch.

The J.I. Case 1390 utility tractor used the J.I. Case engine. It is a 3.6 L, 3,589 cm2, (219.0 cu·in) four-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 60.8 PS (44.7 kW; 60.0 HP) at 2,200 rpm of PTO output power.

The J.I. Case 1390 is equipped with hydrostatic power steering, mechanical drum brakes, two-post ROPS or cab (optional), and 71.9 liters (19 US gal.; 15.8 Imp. gal) fuel tank.

J.I. Case 1390 Specifications

General Specifications
Model J.I. Case 1390
Length 3,420 mm (134.6 in)
Height (exhaust) 2,230 mm (87.8 in)
Wheel base 2,130 mm (83.9 in)
Ground clearance 2WD: 530 mm (20.9 in)
4WD: 330 mm (13 in)
Weight (shipping) 2,495 kg (5,501 lbs)
Fuel tank capacity 71.9 liters (19 US gal.; 15.8 Imp. gal)
Battery 12V
Cabin type Two-post ROPS or cab (optional)
Engine model J.I. Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.6 L, 3,589 cm2, (219.0 cu·in)
Bore and stroke 100.0 mm X 114.0 mm (3.94 in X 4.49 in)
Compression ratio 17.0:1
Horsepower 60.8 PS (44.7 kW; 60.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 7.5 L (7.9 US. qt, 6.6 Imp. qt.)
Coolant capacity: 14.0 L (14.8 US. qt, 12.3 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Mechanical drum
Transmission model
Transmission type Synchromesh with hydraulic dry disc clutch
Gears 12 forward and 4 reverse
Speed Forward: 24.1 kmh (15 mph) Reverse: 13.8 (8.6 mph)
Transmission oil capacity 27.0 L (7.1 US. gal, 5.9 Imp. gal.)
Front tires Ag: 7.50-16
Rear tires Ag: 16.9-30

Three-Point Hitch
Category II/I
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 26.9 L (7.1 US. gal, 5.9 Imp. gal.)
Valves 1 or 2
Pump flow 15.3 gpm (57.9 lpm)

Maybe that’s all the information about the J.I. Case 1390 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment