Specifications and review tractor J.I. Case 1570 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The J.I. Case 1570 is a 2WD row-crop tractor manufactured by J.I. Case in Racine, Wisconsin, USA from 1976 to 1978. The J.I. Case 1570 is equipped with a 8.3 L (504.0 cu·in) six-cylinder diesel engine and a three-speed power shift transmission with 12 forward and 3 reverse gears and hydraulic wet disc clutch .
The J.I. Case 1570 row-crop tractor used the J.I. Case engine. It is a 8.3 L, 8,259 cm2, (504.0 cu·in) six-cylinder turbocharged diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 15.8:1. This engine produced 182.5 PS (134.2 kW; 180.0 HP) at 2,100 rpm of PTO output power.
The J.I. Case 1570 is equipped with power steering, hydraulic wet disc brakes, cab (standard), and 302.8 liters (80 US gal.; 66.6 Imp. gal) fuel tank.
J.I. Case 1570 Specifications
General Specifications
Model
J.I. Case 1570
Length
–
Width
–
Height
–
Wheel base
2,640 mm (103.9 in)
Weight (operating)
7,260 kg (16,006 lbs)
Fuel tank capacity
302.8 liters (80 US gal.; 66.6 Imp. gal)
Battery
12V
Cabin type
Cab (standard)
Engine
Engine model
J.I. Case
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
6
Fuel type
Diesel
Displacement
8.3 L, 8,259 cm2, (504.0 cu·in)
Bore and stroke
117.0 mm X 127.0 mm (4.61 in X 5 in)
Compression ratio
15.8:1
Horsepower
182.5 PS (134.2 kW; 180.0 HP) at 2,100 rpm
Starter
Electric
Coolant capacity:
41.6 L (44 US. qt, 36.6 Imp. qt.)
Transmission and chassis
Chassis
4×2 2WD
Steering type
Power
Brakes
Hydraulic wet disc
Transmission model
–
Transmission type
Three-speed power shift with hydraulic wet disc clutch
Gears
12 forward and 3 reverse
Tires
Front tires
Ag: 11.00-16
Rear tires
Ag: 18.4-38
Three-Point Hitch
Category
III
Control type
–
Lift capacity (at ends)
–
PTO (Power take-off shaft)
Rear PTO type
Independent
Rear PTO speed
1,000 rpm
Hydraulic system
Hydraulic type
–
Valves
2
Pump flow
20.0 gpm (75.7 lpm)
Maybe that’s all the information about the J.I. Case 1570 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The J.I. Case 1570 is a 2WD row-crop tractor manufactured by J.I. Case in Racine, Wisconsin, USA from 1976 to 1978. The J.I. Case 1570 is equipped with a 8.3 L (504.0 cu·in) six-cylinder diesel engine and a three-speed power shift transmission with 12 forward and 3 reverse gears and hydraulic wet disc clutch .
