J.I. Case 2670

Specifications and review tractor J.I. Case 2670 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

J.I. Case 2670The J.I. Case 2670 is a 4WD four-wheel drive tractor manufactured by J.I. Case in Racine, Wisconsin, USA from 1974 to 1979. The J.I. Case 2670 is equipped with an 8.3 L (504.0 cu·in) six-cylinder diesel engine and a partial powershift transmission with 12 forward and 4 reverse gears.

The Case 2670 four-wheel drive tractor used the J.I. Case engine. It is a 8.3 L, 8,259 cm2, (504.0 cu·in) six-cylinder turbocharged diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 15.8:1. This engine produced 222.1 PS (163.3 kW; 219.0 HP) at 2,200 rpm of PTO output power.

The J.I. Case 2670 is equipped with hydrostatic front and hydraulic-assist rear steering, hydraulic wet disc brakes, cab (standard), and 416.4 liters (110 US gal.; 91.6 Imp. gal) fuel tank.

J.I. Case 2670 Specifications

General Specifications
Model J.I. Case 2670
Wheel base 2,590 mm (102 in)
Weight (operating) 9,440 kg (20,812 lbs)
Fuel tank capacity 416.4 liters (110 US gal.; 91.6 Imp. gal)
Battery Two 12V
Cabin type Cab (standard)
Engine model J.I. Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.3 L, 8,259 cm2, (504.0 cu·in)
Bore and stroke 117.0 mm X 127.0 mm (4.61 in X 5 in)
Compression ratio 15.8:1
Horsepower 222.1 PS (163.3 kW; 219.0 HP) at 2,200 rpm
Starter Electric
Coolant capacity: 45.4 L (48 US. qt, 39.9 Imp. qt.)

Transmission and chassis
Chassis 4×4 4WD
Steering type Hydrostatic front and hydraulic-assist rear
Brakes Hydraulic wet disc
Transmission model Range Power Shift
Transmission type Partial powershift
Gears 12 forward and 4 reverse
Speed Forward: 23.3 kmh (14.5 mph) Reverse: 8.2 (5.1 mph)
Front tires Ag: 18.4-34
Rear tires Ag: 18.4-34

PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type Open center
Valves 2
Pump flow 17.0 gpm (64.4 lpm)
Total flow 39.0 gpm (147.6 lpm)

Maybe that’s all the information about the J.I. Case 2670 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment