J.I. Case 430

Specifications and review tractor J.I. Case 430 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

J.I. Case 430The J.I. Case 430 is a 2WD utility tractor from the 430 series. This tractor was manufactured by J.I. Case in Rock Island, Illinois, USA and Racine, Wisconsin, USA from 1960 to 1969. The J.I. Case 430 is equipped with a 3.1 L (188.4 cu·in) four-cylinder diesel engine and one of three transmissions: a unsynchronized gear transmission with 4 forward and 1 reverse gears, a unsynchronized gear transmission with 12 forward and 3 reverse gears or a mechanical shuttle transmission with 8 forward and 8 reverse gears.

The Case 430 utility tractor used the J.I. Case engine. It is a 3.1 L, 3,087 cm2, (188.4 cu·in) four-cylinder natural aspirated diesel engine with 97.0 mm (3.82 in) of the cylinder bore and 105.0 mm (4.13 in) of the piston stroke. The compression ratio rating is 17.5:1. This engine produced 34.5 PS (25.4 kW; 34.1 HP) at 1,750 rpm of PTO output power.

The J.I. Case 430 is equipped with manual or power (optional) steering, mechanical band/disc brakes, an open operator station and 49.2 liters (13 US gal.; 10.8 Imp. gal) fuel tank.


J.I. Case 430 Specifications

General Specifications
Model J.I. Case 430
Length 3,300 mm (129.9 in)
Width 1,550 mm (61 in)
Height (hood) 1,280 mm (50.4 in)
Wheel base 1,910 mm (75.2 in)
Weight (shipping) 1,415 kg (3,120 lbs)
Fuel tank capacity 49.2 liters (13.0 US gal.; 10.8 Imp. gal)
Battery
Cabin type Open operator station
Engine
Engine model J.I. Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.1 L, 3,087 cm2, (188.4 cu·in)
Bore and stroke 97.0 mm X 105.0 mm (3.82 in X 4.13 in)
Compression ratio 17.5:1
Horsepower 34.5 PS (25.4 kW; 34.1 HP) at 1,750 rpm
Starter Electric
Oil capacity: 4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity: 12.8 L (13.5 US. qt, 11.3 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD
Steering type Manual or power (optional)
Brakes Mechanical band/disc
Transmission model
Transmission type Unsynchronized gear with dry disc clutch
Gears 4 forward and 1 reverse
Speed Forward: 19.1 kmh (11.9 mph) Reverse: 4.8 kmh (3 mph)
Transmission model Tripl-Range
Transmission type Unsynchronized gear with dry disc clutch
Gears 12 forward and 3 reverse
Speed Forward: 31.9 kmh (19.8 mph) Reverse: 7.9 kmh (4.9 mph)
Transmission model Dual-Range Shuttle
Transmission type Mechanical shuttle with dry disc clutch
Gears 8 forward and 8 reverse
Tires
Front tires Ag: 6.00×16, 7.50×16
Rear tires Ag: 11×24, 13×24

Three-Point Hitch
Category I
Control type Draft-o-Matic draft control
Type Case Eagle Hitch
PTO (Power take-off shaft)
Rear PTO type Live or independent (optional)
Rear PTO speed 540 or 540/1000 rpm
Hydraulic system
Hydraulic type Dual-Control
Valves 1
Pump flow 8.5 gpm (32.2 lpm)

Maybe that’s all the information about the J.I. Case 430 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment